Back to Simulation Methods and Teaching  |  Previous paper  |  Next paper

Design of MEMS based Polymer Microphone for Hearing Aid Application

V. S. Nagaraja1 Ramanuja H. S.1 Deepak K1 S. L. Pinjare1
1Electronics and Communication Engineering, Nitte Meenakshi Institute of Technology, Bangalore, Karnataka, India

Displacement of polymer microphone.

In this work, a MEMS based condenser microphone [1,2] using Polyimide as the diaphragm has been designed. The microphone structure has a backplate placed on top of the diaphragm. The backplate and the diaphragm are made up of polyimide. The two polyimide plates are separated by air gap which is achieved by using Aluminium as a sacrificial layer in between, which is etched away to create the air gap and where the etch holes in the backplate function as the necessary acoustic holes in the finished microphone [3]. Two gold electrodes are used to apply voltage to carry out electrical modeling and also to give it to the read out circuitry. The COMSOL Multiphysics tool has been used to simulate the movement of the diaphragm with the application of Pressure and voltage. From the same the change in capacitance with respect to change in pressure / voltage can also be derived. The figure 1 shows the complete structure of the MEMS microphone. The simulation results which shows the change in displacement with with application of voltage is shown Figure 2.

Share it on Social Media: