Learning Center

CFD Modeling Capabilities with Version 5.6

In this recorded webinar, you will learn about the computational fluid dynamics (CFD) modeling capabilities as of version 5.6 of COMSOL Multiphysics®. This includes an overview of the relevant features and updates within the software. The webinar also covers the CFD Module and provides an introduction to the Polymer Flow Module and Particle Tracing Module. In addition, there are brief discussions regarding:

  • Single-phase flow
  • Multiphase flow
  • Nonisothermal flow
  • Heat transfer
  • High Mach number flow
  • Reacting flow
  • Fluid–structure interaction
  • Thin-film and porous media flow

The following models are referenced as examples in the recording and can be downloaded from the linked pages:

This webinar is relevant to recently released versions of COMSOL Multiphysics®. You may notice small differences between versions.

You can read about the full functionality of the CFD Module here. To get more information on the functionality that was added or updated in each version of COMSOL Multiphysics®, see the Release History page.

Submit feedback about this page or contact support here.