Technical Papers and Presentations

Quick Search

Resources

White Papers and Application Notes

See How Multiphysics Simulation Is Used in Research and Development

Engineers, researchers, and scientists across industries use multiphysics simulation to research and develop innovative product designs and processes. Find inspiration in technical papers and presentations they have presented at the COMSOL Conference. Browse the selection below or use the Quick Search tool to find a specific presentation or filter by application area.

View the COMSOL Conference 2024 Collection

All

Boston 2024

Florence 2024

COMSOL in a New Tensorial Formulation of Non-Isothermal Poroelasticity

A. Mario-Cesar Suarez[1], and V. Fernando Samaniego[2]

[1]Faculty of Sciences, Michoacan University, Morelia, Mich., Mexico
[2]Faculty of Engineering, National University of Mexico, Mexico City, Mexico

The presence of a moving fluid in a porous rock modifies its mechanical response. Poroelasticity explains how the fluid inside the pores bears a portion of the total load supported by the rock. The remaining part of the load is supported by the elastic skeleton, which contains a laminar ... Read More

Periodic Near-field Enhancement on Metal-Dielectric Interfacial Gratings at Optimized Azimuthal Orientation

M. Csete[1,2], X. Hu[1], A. Sipos[2], A. Szalai[2], A. Mathesz[2], and K. Berggren[1]

[1]Research Laboratory of Electronics, Nanostructures Laboratory, Massachusetts Institute of Technology, Massachusetts, USA
[2]Department of Optics and Quantum Electronics, University of Szeged, Szeged, Hungary

The effect of plasmon-wavelength scaled gratings on the surface plasmon resonance is studied experimentally and theoretically. The model samples are multi-layers containing laser fabricated gratings at bimetal-polymer interfaces. Dual-angle dependent surface plasmon resonance ... Read More

Benchmarking COMSOL - Part 2: CFD Problems

Darrell Pepper
Professor of Mechanical Engineering,
University of Nevada - Las Vegas

Using COMSOL 3.5a, a set of benchmark problems requiring the use of the COMSOL Computational Fluid Dynamics (CFD) module has been simulated. Several of the problems include fluid-heat transfer interactions (Computational Heat Transfer - CHT). The four problems are: flow over a 2-D ... Read More

Using Microwaves for Extracting Water From the Moon

Edwin Ethridge
Senior Materials Scientist, NASA Marshall Space Flight Center

A scientific hypothesis states that cryogenic trapped water is just under the surface of lunar soil at the poles in permanently shadowed craters. Microwave energy can be used to efficiently extract this water from permafrost. COMSOL permits calculation of the heating of simulated lunar ... Read More

The Use of CFD Simulations in Learning Fluid Mechanics at the Undergraduate Level

Marc K. Smith
Professor of Mechanical Engineering, Georgia Institute of Technology

Simple, accurate CFD simulations using COMSOL Multiphysics are used in a senior-level undergraduate course as a means to explore a number of fluid flows with the intent of developing a deep understanding of the underlying fluid mechanical mechanisms involved in the flows. Students also ... Read More

Rechargeable Battery for Hybrid Diesel-Electric Locomotive

Michael A. Vallance
Team Leader, GE Global Research

Over time, rechargeable batteries degrade and eventually stop working. You see some combination of declining capacity, rapid self-discharge, and reduced power. Degradation mode depends on battery design, but also on the application. Often, multiple physical processes contribute to ... Read More

2D Extraction of Open-Circuit Impedances of Three-Phase Transformers

R. Escarela-Perez[1], E.A. Gutierrez-Rodriguez[2], J.C. Olivares-Galvan[1], M.S. Esparza-González, and E. Campero-Littlewood[1]

[1]Departamento de Energia, Universidad Autonoma Metropolitana - Azcapotzalco, Mexico D.F., Mexico
[2]Instituto Tecnologico de Aguscalientes, Aguascalientes, Mexico

This work is concerned with the study of the asymmetrical phenomenon observed in three-phase transformers during the standard short-circuit test. The purpose of our work is to see if the asymmetric measurements can be predicted with the use of 2D finite-element models. To this end, we ... Read More

A Non-isothermal Modeling of a Polymer Electrolyte Membrane Fuel Cell

H. Shin[1]

[1]Department of Mechanical Engineering, University of Michigan – Ann Arbor, Michigan, USA

Polymer electrolyte membrane (PEM) fuel cells have attracted attention as an alternative power source in various applications such as vehicles, portable supplies, and stationary power systems. A non-isothermal PEM fuel model is developed and simulated by using COMSOL Multiphysics. ... Read More

MultiPhysics Simulation of Direct Double Helix Magnets for Charged Particle Applications

P. J. Masson[1], and R. B. Meinke[1]
[1]Advanced Magnet Lab, Palm Bay, Florida, USA

Charged particle beam manipulation requires magnetic dipoles for steering and quadrupoles for focusing. Conventional magnets are currently used leading to very large and heavy systems. Miniaturization of the optic magnets would enable the development of more affordable systems and ... Read More

Calculation of the Magnetic Field Intensity in a Rectangular Conductor Carrying Current in Electromagnetism Introductory Courses

J.C. Olivares-Galvan[1], I. Hernandez[2] , P.S. Georgilakis[3], and L.E. Campero[1]

[1]Universidad Autónoma Metropolitana, Azcapotzalco, Mexico, D.F.
[2]Centro de Investigacion y de Estudios Avanzados del IPN, Unidad Guadalajara, Guadalajara, Jalisco, Mexico
[3]School of Electrical and Computer Engineering, National Technical University of Athens, Athens, Greece

This paper describes a type of didactic material used when teaching electromagnetism. The purpose is to guide the students to verify the results of a Finite Element (FE) simulation using those obtained analytically. This procedure has shown to be of great help during their learning of ... Read More

First

4651–4660 of 5989

Last