Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Modify COMSOL physics

Posted Dec 30, 2010, 1:12 p.m. EST Version 4.0a 2 Replies

Carlos Murillo
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi!

I would like to modify some physics added in COMSOL 4.0a by introducing some new equations for a specific study. Could you tell me if this is possible, please?

Thanks for your comments
2 Replies Last Post Dec 31, 2010, 10:20 a.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Dec 31, 2010, 1:04 a.m. EST
Hi

use the PDE and/or ODE physics interface and off you go (there are examples in the model library and in the books referred to on the main web site.

I can only suggest tht you get hand on the latest v4.1 and patch it as the documentation is far better than in the older v4.0

--
Good luck
Ivar
Hi use the PDE and/or ODE physics interface and off you go (there are examples in the model library and in the books referred to on the main web site. I can only suggest tht you get hand on the latest v4.1 and patch it as the documentation is far better than in the older v4.0 -- Good luck Ivar
Carlos Murillo
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Dec 31, 2010, 10:20 a.m. EST
Thanks for your answer. I'll check it out
Thanks for your answer. I'll check it out

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content