Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

1d of data from 3d Simulation

Posted May 2, 2011, 9:13 a.m. EDT Version 4.0a 1 Reply

John Haase
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi All,

Is it possible to get values from along a line, like to taking a slice of a slice.

Thank you,

John Haase
1 Reply Last Post May 2, 2011, 4:13 p.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago May 2, 2011, 4:13 p.m. EDT
Hi

in v4 (at least 4.1 ;) you can generate a Data set of the type line. That's the clossest I see, or generate a new slice data set and add a projecton integration on that one

--
Good luck
Ivar
Hi in v4 (at least 4.1 ;) you can generate a Data set of the type line. That's the clossest I see, or generate a new slice data set and add a projecton integration on that one -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content