Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Several thin layers overlaid mesh
Posted Jun 24, 2011, 4:11 a.m. EDT Mesh Version 4.0a 0 Replies
Please login with a confirmed email address before reporting spam
I'm trying to mesh 3 thin layer but inside one of them I have a geometrical form. I explain my problem with a simplified exemple : I have 3 squares with the same dimensions : 200µm*200µm*0.5µm (x*y*z) but in one of them I have a circle (to simplify) with a diameter of 50µm and a thickess of 0.2µm.
I have tried to mesh with tetrahedron but I have a bad resolution and many problem in transient mode, and with the swept mesh I have errors with the surfaces definitions. I think that the second method is the good one but I don't know how well defined the swept mesh.
Thank you for your help
Hello Nicolas Dufour
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.