Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

CPU heat sink model

Posted Oct 26, 2011, 2:36 p.m. EDT Geometry Version 4.1 2 Replies

StudentDK
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello Community,

we want to build the CPU heat sink model by ourselves!
Our problem is that we don’t find a way to combine the two rectangles with an inclined surface!
Please have a look at the two pictures.

Picture 1: our model
Picture 2: the finished model

Can someone give us a little tutorial how to build the CPU heat sink model?

Thank you!

Attachments:

2 Replies Last Post Oct 28, 2011, 12:00 p.m. EDT
Vincent Zhang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Oct 26, 2011, 9:50 p.m. EDT
hi Daniel K,

Please see the User's Guide -- Geometry Modeling and CAD Tools -- Creating a 3D Geometry Model, there is the step by step build instructions of this sink. it is created by revolve.
hi Daniel K, Please see the User's Guide -- Geometry Modeling and CAD Tools -- Creating a 3D Geometry Model, there is the step by step build instructions of this sink. it is created by revolve.
StudentDK
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Oct 28, 2011, 12:00 p.m. EDT
Thank you very much!
Thank you very much!

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content