Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Rotation about the point

Ramamoorthy Venkataramanan

Please login with a confirmed email address before reporting spam


Hi,

Roller is placed on the sheet and sheet is start moving because of roller rotation. I just want to give a roller rotation using 'Prescribed Dsiplacement' b.c in x and y about a point and also if the center point is different from origin, how we can give.

Pls clarify. Thanks.


--

Thanks,
Ramamoorthy V

1 Reply Last Post Mar 29, 2012, 4:26 p.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Mar 29, 2012, 4:26 p.m. EDT
Hi

if you are in "solid" and your roller has a internal circle/cylinder shape (and not a point that gives singularity) you can use the rigid connector and prescribe the CoR (centre of rotation), or you migfht add a wek constraints on "r" a cylidrical coordiante defined at the centre of rotation for your circular "rolling" boundary. Or you try the "roller condition on a circle/cylinder

--
Good luck
Ivar
Hi if you are in "solid" and your roller has a internal circle/cylinder shape (and not a point that gives singularity) you can use the rigid connector and prescribe the CoR (centre of rotation), or you migfht add a wek constraints on "r" a cylidrical coordiante defined at the centre of rotation for your circular "rolling" boundary. Or you try the "roller condition on a circle/cylinder -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.