Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Need help with Heat Transfer in Solid
Posted Jun 20, 2012, 6:26 p.m. EDT Heat Transfer & Phase Change Version 4.2a 0 Replies
Please login with a confirmed email address before reporting spam
The solution never reach a conversion solution.
Investigate the model, looks like Added Heat Source 1 never get overriden in Thermal Insulation 1 but added Heat Flux 1 get overriden. in the Thermal Insulation 1.
Did I miss anything for this simulation?
Have any body run into this same problem?
Your help is appreciated.
Tac.
Attachments:
Hello Tac Huynh
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.