Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Can I set two layers of materials in one domain?

Posted Jun 30, 2012, 4:02 p.m. EDT Heat Transfer & Phase Change, Geometry, Materials Version 4.3 0 Replies

Xingjian Chen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi everyone,
I plan to set two materials in a board. The geometry is a circle layers on a square layer in 2D model. My plan is to set the square as FR4 and the circle is Copper. And under the copper circle, the material is FR4. In other words, in the circle domain, can I set two materials like two layers? Thank you!
Xingjian

Attachments:

0 Replies Last Post Jun 30, 2012, 4:02 p.m. EDT
COMSOL Moderator

Hello Xingjian Chen

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content