Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Frequency-dependent Distributed Impedance for CPE equation

Manuel Carrasco Yague

Please login with a confirmed email address before reporting spam

Hello,

I have a 2D simulation of two electrodes in contact with a conducting material which uses the AC/DC module and the frequency-domain study. One of the electrodes is configured as the terminal. In the other electrode, I would like to establish a Distributed Impedance to behave as a constant-phase element (CPE), as to resemble the electrode-electrolyte double layer.

The CPE impedance:

Using the formula provided in the Distributed Impedance:

I can define my parameters as:

Question: Is it possible to define a frequency dependant parameter (e.g. ) on the Frequency Domain Study? If not, is there another approach to this?

Thank you.


0 Replies Last Post Oct 27, 2021, 4:10 a.m. EDT
COMSOL Moderator

Hello Manuel Carrasco Yague

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.