Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Failed to evaluate variable
Posted Jun 7, 2023, 1:38 a.m. EDT Semiconductor Devices, Geometry, Studies & Solvers Version 5.6 0 Replies
Please login with a confirmed email address before reporting spam
The below post is related to an archived discussion
[start here] I am using semiconductor module for a LED project in version 5.6. Mainly I am following this model: InGaN/AlGaN Double Heterostructure LED
But unable to compute due to the error. Please help me out. Thanks.
Division by zero. - Function: / Failed to evaluate variable. - Variable: comp1.semi.V_init - Defined as: (((comp1.semi.Vth_init(((-log(comp1.semi.p_init/comp1.semi.ni_init))(comp1.semi.Ndoping_init<0))+(log(comp1.semi.n_init/comp1.semi.ni_init)(comp1.semi.Ndoping_init>=0))))-comp1.semi.chi_init)-(0.5comp1.semi.Eg_init))+((comp1.semi.Vth_init0.5)log(comp1.semi.Nv_init/comp1.semi.Nc_init)) Failed to evaluate expression. - Expression: comp1.semi.V_init
Attachments:
Hello Moumita Indra
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.