Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Heat capacity and density for stationary problem

Posted Nov 4, 2024, 1:58 a.m. CST Heat Transfer, Materials, Studies & Solvers Version 6.2 1 Reply

Lars Kahre
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Why need the stationary solver in comsol multiphysics (heat transfer in solids) information about heat capacity and density of the material?

1 Reply Last Post Nov 4, 2024, 9:42 a.m. CST
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 2 years ago Nov 4, 2024, 9:42 a.m. CST

You don't need it. The physics node is set up for the more general case and shows missing values in the material settings but the solver isn't complaining in case the values are missing.

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
You don't need it. The physics node is set up for the more general case and shows missing values in the material settings but the solver isn't complaining in case the values are missing.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content

LinkedIn
Instagram
X