Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Transformer Simulation

Posted Dec 28, 2024, 9:54 a.m. EST Electromagnetics, Computational Fluid Dynamics (CFD), Materials 1 Reply

Abrar Ahmad Razzaqi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

How to select the domain for oil (in void space) as a material in the power transformer simulation after making the geometry?

1 Reply Last Post Dec 28, 2024, 3:51 p.m. EST
David Greve
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 months ago Dec 28, 2024, 3:51 p.m. EST

In order to select a domain there needs to BE a domain. Reading between the lines here, perhaps your problem is that you have drawn the coils and the core but not a surrounding domain.

When you DO draw a surrounding domain you will also need to think about the appropriate boundary conditions.

In order to select a domain there needs to BE a domain. Reading between the lines here, perhaps your problem is that you have drawn the coils and the core but not a surrounding domain. When you DO draw a surrounding domain you will also need to think about the appropriate boundary conditions.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content