Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Corrosion in pipelines - flow velocity

Posted Mar 16, 2025, 2:13 p.m. EDT Corrosion & Corrosion Protection, Modeling Tools & Definitions Version 6.2 0 Replies

Rodolpho Delunardo
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello! I am trying to implement the flow velocity in my corrosion model for pipelines. I am using the Tertiary Current Distribution, water-based with electroneutrality. I am using the convection section at the Electrolyte node to input the velocity field. I also have the convection check-box marked at the No Flux node. Would this be the correct way to implement the velocity?

0 Replies Last Post Mar 16, 2025, 2:13 p.m. EDT
COMSOL Moderator

Hello Rodolpho Delunardo

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content