Menu

Discussion Forum

New Discussion
Filter

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Creating an application for submarine power cable for different configurations

Posted Mar 18, 2025, 7:52 a.m. EDT Geometry, Results & Visualization, User Interface 0 Replies

Aishwarya Suresh Babu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello Folks,

Task - To create a single interface in COMSOL Application Builder for a model that can handle different configurations (2, 3, or 4 conductors, with or without insulation or screens)

So, i have planned to create a different Geometries for 2, 3 and 4 conductors and different studies and background in application builder creating a drop down menu to select the conductors and it should redirect to that specific geometry and study with the basic form which includes input, output, graphics and ribbon and ask for the following. 1) Conductor diameter 2) Insulation thickness 3) Screen thickness 4) cable diameter

Output Capacitance Inductance Impedance Attenuation

Also, i have all the formulas required for calculations.

So, I am looking for the resources or approach for this above conditions.

Thanks in advance

0 Replies Last Post Mar 18, 2025, 7:52 a.m. EDT
COMSOL Moderator

Hello Aishwarya Suresh Babu

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content