Permanent magnet and iron block

Please login with a confirmed email address before reporting spam

Hello everyone. I wanna use Comsol to calculate the magnetic force of an iron block (L1W1H1) under the influence of a permanent magnet (L2W2H2), and their distance change from 2cm to 3cm. How can I achieve this? Many thanks.


4 Replies Last Post May 21, 2025, 3:19 a.m. EDT

Please login with a confirmed email address before reporting spam

Posted: 2 weeks ago May 7, 2025, 6:16 a.m. EDT

https://www.comsol.com/model/permanent-magnet-78

https://www.comsol.com/model/permanent-magnet-78

Please login with a confirmed email address before reporting spam

Posted: 18 hours ago May 21, 2025, 12:11 a.m. EDT

https://www.comsol.com/model/permanent-magnet-78

Thanks for your reply. I have tried this example. However, it always unable to converge.

>https://www.comsol.com/model/permanent-magnet-78 Thanks for your reply. I have tried this example. However, it always unable to converge.

Edgar J. Kaiser Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 16 hours ago May 21, 2025, 2:36 a.m. EDT

I tried it too and it converges in seconds.

-------------------
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
I tried it too and it converges in seconds.

Please login with a confirmed email address before reporting spam

Posted: 15 hours ago May 21, 2025, 3:19 a.m. EDT

If you post your model then we might be able to troubleshoot, but if the instructions have been followed in the example above, it should work just fine.

If you post your model then we might be able to troubleshoot, but if the instructions have been followed in the example above, it should work just fine.

Reply

Please read the discussion forum rules before posting.

Please log in to post a reply.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.