Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Initial conditions (problem) - Fluid Structure Interaction

Posted Nov 20, 2013, 1:40 a.m. EST MEMS & Nanotechnology, MEMS & Piezoelectric Devices, Microfluidics, Studies & Solvers Version 4.3a 0 Replies

Mauricio Pedroza
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

I am working with the FSI module and I am trying to simulate the pumping phenomena in a micropump, by means of a moving plate. I have successfully obtained results for certain design parameters of the micropump, but, when I try to slightly modify those parameters (for example: plate thickness from 20[um] to 22[um]). The simulation doesn't work and the study reports an error in the initial conditions.

Any input is appreciated!

Thanks,
Mauricio
0 Replies Last Post Nov 20, 2013, 1:40 a.m. EST
COMSOL Moderator

Hello Mauricio Pedroza

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content