Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Current Flow (Conductive Media DC)

Please login with a confirmed email address before reporting spam

Hello, I have a question regarding the Conductive Media DC Mode.

My Model has the following boundary conditions:
- Inflow Boundary with "inward current flow"
- Outflow Boundary with "electric potential"
- all the other Boundaries are "electrical insulated"

I want to calculate the "outward current flow" at the outflow boundary. But I am not sure, how to do this?

Is it correct to use "Postprocessing -> Boundary Integration" for the outflow boundary and with "normal current density" as predefined quantities?

It would be really nice if you could help me. Thanks in advance, Felix


0 Replies Last Post Aug 3, 2010, 9:27 a.m. EDT
COMSOL Moderator

Hello PleaseHelpUs

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.