The Application Gallery features COMSOL Multiphysics® tutorial and demo app files pertinent to the electrical, structural, acoustics, fluid, heat, and chemical disciplines. You can use these examples as a starting point for your own simulation work by downloading the tutorial model or demo app file and its accompanying instructions.
Search for tutorials and apps relevant to your area of expertise via the Quick Search feature. Note that many of the examples featured here can also be accessed via the Application Libraries that are built into the COMSOL Multiphysics® software and available from the File menu.
Evaluating Singular Stress Fields
A detailed description of these models can be found in our blog post “How Should I Evaluate Singular Stress Fields?”. The models are: notchedStrip.mph – Model for the initial studies of the stress field properties. singularityPower.mph – Small model solving the transcendental equation ... Read More
Homogenized Model of a Corrugated Sheet
This example presents a homogenized model of a corrugated sheet based on a unit cell approach. The numerically obtained equivalent stiffness matrices are compared with various analytical models. Two corrugation profiles, trapezoidal and round, are considered in this example. Read More
Beam Section Calculator (Using LiveLink™ for Excel®)
This app demonstrates the following: Reading and importing data from an Excel®-file Exporting data to an Excel®-file Light theme The app computes the beam section properties and true stress distribution in a designated steel beam section. A broad range of American and European beam ... Read More
Thermally Loaded Beam
In this example you will build and solve a 3D beam model using the 3D Beam interface. This model shows how a thermally induced deformation of a beam is modeled. Temperature differences are applied across the top and bottom surfaces as well as the left and right surfaces of the beam. ... Read More
Parameter Estimation with Covariance Analysis
When estimating the parameters of a multiphysics model, both experimental noise and modeling uncertainties will contribute to corresponding uncertainties in the final parameters estimated. In this verification example, we demonstrate the new Variance functionality in the Parameter ... Read More
Homogenization of a Composite Beam
Beam theories are well-developed for slender structures with homogeneous materials and isotropic cross-sections. The traditional beam theories do no apply to beams made of different materials in the cross-section. Therefore, a homogenization-based numerical model is needed to compute ... Read More
Optimization of a Truss Tower
Gradient based optimization is an efficient way of computing better values for many control variables. This example optimizes diameters of individual members in a truss structure such that the structure becomes stiffer without adding mass to the structure. The structure will be only be ... Read More
In-Plane Framework with Discrete Mass and Mass Moment of Inertia
In this model, you build and solve a 2D beam model using the 2D Structural Mechanics Beam interface. This model describes the eigenfrequency analysis of a simple geometry. A point mass and point mass moment of inertia are used in the model. The two first eigenfrequencies are compared ... Read More
Scordelis–Lo Roof Shell Benchmark
In this example a thin curved membrane is built and solved using the Shell interface. This model is a widely used benchmark model denoted the Scordelis-Lo roof. The computed maximum z-deformation is compared with the value given in Proposed Standard Set of Problems to Test Finite ... Read More
Ten-bar truss optimization
Find the optimal cross section areas of trusses in a structure given a prescribed set of limitations and a clear objective. The structure is made up of trusses which are elements that can only sustain axial forces. Read More