See How Multiphysics Simulation Is Used in Research and Development
Engineers, researchers, and scientists across industries use multiphysics simulation to research and develop innovative product designs and processes. Find inspiration in technical papers and presentations they have presented at the COMSOL Conference. Browse the selection below or use the Quick Search tool to find a specific presentation or filter by application area.
View the COMSOL Conference 2024 Collection
Simulations with COMSOL Multiphysics were performed, in order to analyze the gas flow patterns during the induced ignition of gases. Simplified calculations were performed. The ignition spark was assumed to have a temperature of 2000 K and a laminar flow was selected. 2D calculations ... Read More
Current transformers are used to measure currents in power grid systems. They are characterized by strong interactions between external electrical sources and loads respectively and the magnetic subsystem. Self-heating due to losses has to be considered because of the temperature ... Read More
Modeling and simulation softwares are very useful tools when we have to analyse and understand the different phenomena occurring during metal foams processing, because several simultaneous physical mechanisms have to be accounted for. In this work we use Comsol Multiphysics 4.2 to model ... Read More
With detailed hydrodynamic modelling of a system the critical parameters and operation limits can be determined. In the field of fluid dynamic and reactor engineering one of the most important aspects is the practical knowledge of future engineers and technicians. In our research ... Read More
Studies by Nishaat (2009) showed that Terzaghi\'s bearing capacity model didn\'t adequately predict the bearing capacity failure in Philippi Dune sands. Nishaat carried out her investigation using a physical model that was built in a geotechnical laboratory. The failure surfaces she ... Read More
For PE insulated cables both the temperature difference ?T and the electric field coefficient ? have a significant influence on the electric field distribution because PE has a nonlinear electric conductivity which is approximately a function of the temperature and the electric field ... Read More
The geometrical design and material choice for a refractory lining requires a good understanding of its thermo-mechanical behavior. Design engineers clearly need a tool for fast and efficient computation of thermo-mechanical state of refractory linings under various conditions. However, ... Read More
A resonant MEMS sensor for viscosity and mass density measurements of liquids was modeled. The device is based on Lorentz-force excitation and features an integrated piezoresistive readout. The core sensing element is a rectangular vibrating plate suspended by four beam springs. The ... Read More
An Ion Mobility Spectrometer is a device to analyze different components of a gas mixture. A feature of this technology is the ultra-low detection limit which can be obtained for most trace gases. Due to a limited resolution which is needed to differ between different components an ... Read More
Geothermal heat production from deep reservoirs (5000-7000 m) is currently examined, not only in Germany. Our reference set-up consists of two pipes within a single borehole: one for pumping. We examine a design, where a single borehole splits into two legs at a certain depth. The two ... Read More