See How Modeling and Simulation Is Used Across Industries
Multiphysics modeling and simulation drives innovation across industries and academia — as is evidenced by the many uses showcased in the technical papers and posters presented by engineers, researchers, and scientists at the COMSOL Conference each year.
Draw inspiration from the recent proceedings collected below, or, to find a specific presentation or filter by application area or conference year/location, use the Quick Search tool.
View the COMSOL Conference 2025 Collection
Nano-structures consisting of layered metal-dielectric stacks (MDSs) can be designed to have evanescent transmission and reflection coefficients that oscillate as a function of transverse wavevector and frequency. However, these structures always suffer from the material losses and ... Read More
Nowadays, mathematical models have been widely applied in varies fields; especially in fluid mechanics and nonlinear material which are very complex or even not possible to be calculated using analytical methods. In this paper, a hydraulic displacement amplifier coupled with fluid ... Read More
The reactive transport simulation interface COMSOL-PHREEQC, developed by Wissmeier & Barry (2011), provides a MATLAB®-based coupling interface to combine COMSOL Multiphysics® for flow and heat transport simulations and PHREEQC as a geochemical batch reaction simulator. The ... Read More
Single stage centrifugal pumps are widely used in several engineering fields such as: room conditioning, energetic cycles, automotive industry, home care, etc. Thus, the possibility of simulate their behaviour, in terms of pressure increase and mass flow rate, is helpful in reducing ... Read More
This paper presents the design of an electron gun that could be employed for vacuum tubes operating in the THz range. In this context, vacuum tubes one of the main difficulties in the realization of THz vacuum tube is the design and the realization of the electron gun. Since the ... Read More
This paper describes the thermal and structural combined simulation on COMSOL Multiphysics® of a Microwave (MW) Fin Taper (FT) Spatial Power Combiner (SPC) Power Amplifier (PA), based on rectangular Waveguide (WG). In the SPC based PA's, the captured power is feeded by microstrip ... Read More
The void shape evolution of a trench patterned silicon substrate results in diverse cavities by varying initial conditions. The size and the arrangement of the initial trenches are decisive for the transformation process besides the annealing conditions which are, in fact, time and ... Read More
The water storage reservoir at the WTP Noardburgum is used to even out demand and supply and ensure a stable drinking water production capacity. At the moment the rectangular reservoir has a single pipeline which serves as an inlet during the fill cycle and as an outlet during the draw ... Read More
Heterogeneous materials with different phases, are conductive and insulating (dielectric), and are physically present in different natural materials as e.g. atmospheric ice. Jonscher’s proposed ‘universal dielectric response’ is not sufficient for such materials, as it only reflects ... Read More
A hyperelastic seal is pulled over a metal ring in a coffee machine for maintenance reasons. The force needed to pull the hyper elastic seal over the part is too high and should be reduced for maintenance reasons. Using the COMSOL Multiphysics® Structural Mechanics Module, and using the ... Read More