See How Modeling and Simulation Is Used Across Industries
Multiphysics modeling and simulation drives innovation across industries and academia — as is evidenced by the many uses showcased in the technical papers and posters presented by engineers, researchers, and scientists at the COMSOL Conference each year.
Draw inspiration from the recent proceedings collected below, or, to find a specific presentation or filter by application area or conference year/location, use the Quick Search tool.
View the COMSOL Conference 2025 Collection
Ohmic heating (Joule heating) is a volumetric heating technology which can effectively process almost any pumpable fluid with extremely high energy efficiency (>95%). This is particularly useful for very thick fluids, those that burn on to hot surfaces and those with high solids content ... Read More
A model built with COMSOL Multiphysics® to exploit meteorological forecasts and instant outdoor meteorological data (temperature, solar radiation, moisture, wind speed and direcition, etc.) together with indoor ambient data (air temperature, radiant temperature of enclosures, etc), ... Read More
For biocompatible prosthetics, from dental implants up to bone parts, manufacturers have to find the best way to correlate process parameters and the material properties as to meet the unique needs of individuals. Additive manufacturing techniques aim at creating complex biocompatible ... Read More
The COMSOL's Heat Transfer module was used in this study to evaluate the temperature distribution in concrete box-girders subjected to exterior thermal conditions. The included thermal loads were air temperature, wind speed in addition to solar radiation. Moreover, the reflected ... Read More
Corrugated board is produced on a machine where the corrugated medium is glued between two flat paper surfaces, the liners. The board is cut into sheets and stored in a stack until suitable moisture content has been reached. The sheets are then cut and creased into blanks for the ... Read More
COMSOL Multiphysics® software is used to model the field joint application process on carbon steel pipelines for deep sea crude oil transportation, taking into account not only heat transfer, cure kinetics, and crystallization, but also thermal, cure and crystallization shrinkage and the ... Read More
Among optical gas sensing methods, photoacoustic (PA) spectroscopy combined with a laser source has proven to be a very robust and sensitive method for trace gas detection. COMSOL Multiphysics® software was used to calculate the frequency response of differential Helmholtz resonator ... Read More
In ground-coupled heat pumps (GCHPs) the coupling between heat pumps and ground occurs by means of ground heat exchangers, that can be installed vertically inside boreholes (BHEs) or horizontally (HGHEs). In the horizontal installation, the heat exchangers are placed in shallow trenches ... Read More
The high temperature measurement of thermal conductivity is vital for predicting nuclear fuel performance both during reactor operation and accident conditions. The proposed method uses experimental thermograms obtained via high temperature laser-flash heating of a disc-shaped sample in ... Read More
The Atlantis massif is a domal submarine seamount close to the mid-Atlantic Ridge at 30 °N. Close to the crest of the Massif, the Lost City hydrothermal field (LCHF) has been active for at least 120,000 years, venting fluids with a temperature of 40-90 °C. 5 km north of Lost City, a ... Read More