See How Modeling and Simulation Is Used Across Industries
Multiphysics modeling and simulation drives innovation across industries and academia — as is evidenced by the many uses showcased in the technical papers and posters presented by engineers, researchers, and scientists at the COMSOL Conference each year.
Draw inspiration from the recent proceedings collected below, or, to find a specific presentation or filter by application area or conference year/location, use the Quick Search tool.
View the COMSOL Conference 2025 Collection
Aim of the study is to determine the influence of some of the most important operating variables, especially humidity and temperature, of drying air on the performance of cooking process of pork meat. The process is simulated using finite elements software COMSOL Multiphysics®. The ... Read More
This work falls into the framework of an ESA experiment, which consists of observing the behavior of patterns and structures that can be formed after instability onset in a HFE7100 liquid layer, evaporating into a nitrogen gas flow. This study is performed by a three-dimensional ... Read More
Within projects of geothermal energy, we need hydrodynamic and thermal modeling to forecast the impacts of geothermal deep wells on existing wells. In case of pumping and reinjection of the geothermal fluid in a deep groundwater reservoir, located in a sedimentary basin with lateral and ... Read More
Evaporative cooling is a promising cooling method for dissipating high heat fluxes in high power density applications. One possibility to enhance heat flux is a generation of microstructures into the cooler surface. This enlarges the cooler surface and systematically affects the fluid ... Read More
A grand variety of microactuator technologies and demonstrators has been introduced during the last years. Of particular interest are the microactuators based on phase change materials and especially paraffin wax, which can volumetrically expand up to 15%, providing high force actuation. ... Read More
In this study we investigate the heat and mass transfer in a porous media with phase change. The liquid fluid is injected from one side and heated from the other side, where it leaves the porous material in a gaseous state. Dominant forces are capillary interactions and two-phase heat ... Read More
This study examines the effect of air flow between the building integrated PV-panel and the wall. To formulate the heat exchange process for the air flowing between the PV panel and the wall, time-dependent, heat transfer partial differential equations (PDEs) are solved with COMSOL ... Read More
Tecnotion produces linear motors for the high tech automation and semiconductor markets. Orthocyclically wound coils give the best performance because the largest number of windings can be packed into a given volume, as opposed to "wild winding", where the windings fall where they may. ... Read More
For the SAFARI Imaging Spectrometer, part of the SPICA satellite payload, a Calibration Source is under development. Challenges in the design include the low cooling power (few mW) available at cryogenic temperatures. COMSOL Multiphysics® simulations were used extensively in the design ... Read More
Radiofrequency ablation is a minimally invasive techinique which is used to treat some kinds of cancer. The realism of theoretical models is very important. An influential factor in this realism is mathematical functions that model the temperature-dependence of tissue thermal and ... Read More