See How Modeling and Simulation Is Used Across Industries
Multiphysics modeling and simulation drives innovation across industries and academia — as is evidenced by the many uses showcased in the technical papers and posters presented by engineers, researchers, and scientists at the COMSOL Conference each year.
Draw inspiration from the recent proceedings collected below, or, to find a specific presentation or filter by application area or conference year/location, use the Quick Search tool.
View the COMSOL Conference 2025 Collection
AlGaN/GaN heterostructures are unique because the 2DEG at the interface is created by the difference in polarization properties of the AlGaN and the GaN layers; not due to intentional doping. In this work, a 3D model of an electrostatically actuated micro cantilever has been developed ... Read More
The present study deals with a twodimensional modeling and simulation of a thermal swing adsorption (TSA) process used for the capture of CO2 from CO2/N2 mixture. The models are described by partial differential equations (PDEs) including conservation equations, models for equation of ... Read More
The aim of the proposed device is to overcome the typical drawbacks of MHD generators, such as the needed of a very high external magnetic field, the strong dependency of the efficiency by the temperature of the fluid, and the deterioration of the electrodes that are in contact with the ... Read More
Computational fluid dynamics has emerged as an advanced tool for studying detailed behavior of fluid flow and heat transfer characteristics in many chemical engineering applications like packed beds. Packed beds play an important role in various chemical industries. Hence understanding ... Read More
Capillary effects are common in microfluidics due to large surface-to-volume ratio of flows inside microchannels. In biological or chemical analysis, capillary flow is used for the transport of liquid and mixing enhancement, without applying any external means. It’s used in biochemical ... Read More
INTRODUCTION: Micro Electro Mechanical Systems (MEMS) are fabricated with an in-plane fabrication technology. Out-of-plane structures can be designed to be assembled to provide thermal and electrical isolation from the substrate [1 -3]. These isolations can potentially improve the ... Read More
This paper presents a numerical study of the deposition of spherical charged nanoparticles caused by convection and Brownian diffusion in a pipe with a cartilaginous ring structure. The model is supposed to describe deposition of charged particles in the upper generations of the ... Read More
Submerged membrane bioreactor (SMBR) is an efficient technology for wastewater treatment that combines biological process and membrane filtration in one single stage. In the most usual configuration, submerged membrane hollow fibers are set in several planes. Air is introduced from the ... Read More
The production of hydrogen from renewable energy surplus is seen as a key strategy for energy storage. Centro Nacional del Hidrógeno works actively in this direction by considering a strategic line in order to achieve a sustainable energy future. Alkaline electrolysis is the main ... Read More
Gallium nitride (GaN) and its related nitride alloys with special physical properties are in technical areas of high interest. The growing of gallium nitride boules on non-native sapphire or silicon carbide requires complicated mechanisms of defect reduction in the lattice structure. ... Read More