Technical Papers and Presentations

Quick Search

Resources

White Papers

See How Multiphysics Simulation Is Used in Research and Development

Engineers, researchers, and scientists across industries use multiphysics simulation to research and develop innovative product designs and processes. Find inspiration in technical papers and presentations they have presented at the COMSOL Conference. Browse the selection below or use the Quick Search tool to find a specific presentation or filter by application area.

View the COMSOL Conference 2024 Collection

Search Term:

Laminar Thermal Mixing in Coating Flows

A. Haas[1], M. Scholle[1], A. Aksel[1], H.M. Thompson[2], R.W. Hewson[2], and P.H. Gaskell[2]

[1]Department of Applied Mechanics and Fluid Dynamics, University of Bayreuth, Bayreuth, Germany
[2]School of Mechanical Engineering, University of Leeds, Leeds, United Kingdom

Heat transfer in a plane shear flow configuration consisting of two infinitely long parallel plates is considered. In laminar flows over undulated substrates eddies can be generated due to the kinematical constraints. A closed form analytical solution for the velocity field, based on ... Read More

Drift-Diffusion and Ballistic Transport Modeling in III-Nitride Multiple-QW Light Emitting Structures

M.V. Kisin, and H.S. El-Ghoroury
Ostendo Technologies Inc., Carlsbad, CA, USA

COMSOL-based modeling software developed at Ostendo Technologies allows detailed simulation of semiconductor lasers and light-emitting diodes. In this work, we study the inhomogeneity of the carrier injection into optically active quantum wells of polar and nonpolar III-nitride light ... Read More

The Use of COMSOL Multiphysics® Software to Explore Flooding and Rising Dampness Problems Related to Cultural Heritage

H.L. Schellen [1], A.W.M. van Schijndel [1],
[1] Eindhoven University of Technology, Eindhoven, Netherlands

In The Netherlands rising dampness problems due to flooding of rivers and high groundwater levels form an essential treat for monumental buildings and heritage. A number of cases exists where rising dampness problems lead to the deterioration of wall finishes but also of valuable wall ... Read More

Cooling Study of Baffles Integration in the Molding Industry

B. Noailles [1] , S. Meunier [1], V. Bruyere [2]
[1] RocTool, Savoie Technolac, Module R, France
[2] SIMTEC, France

In the molding industry, high productivity rate, low energy consumption, large 3D parts, and homogeneous temperature distribution are the main targets. The 3iTech® inductive technology developed by RocTool ensures both good temperature homogeneity and short heating time. Conventionally, ... Read More

Modeling the Dynamic Viscous and Thermal Dissipation Mechanisms in a Fibrous Porous Material

B.P. Semeniuk [1], P. Göransson [1],
[1] KTH Royal Institute of Technology, Marcus Wallenberg Laboratory for Sound and Vibration Research, Stockholm, Sweden

The main mechanisms of acoustic attenuation in a bundle of fibres typical of lightweight fibrous porous materials are the dynamic viscous drag forces on the surface of the fibres, and the thermal heat transfer between the solid fibres and the surrounding fluid. Microstructure models ... Read More

Using Multiphysics to Quantify Leakage Rates in New and Rehabilitated Sewer and Water Pipes

C. Hansen [1],
[1] Electro Scan Inc., Sacramento, CA, USA

Traditionally, municipal sewer and water agencies have relied on acoustic data loggers and closed-circuit television cameras to inspect pipes for leaks. In addition, the same legacy techniques have been used to certify new and rehabilitated pipes as watertight. Unfortunately, visually ... Read More

A Study on the Suitability of Indium Nitride for THz Plasmonics

A. Shetty[1], K. J. Vinoy[1], S. B. Krupanidhi[2]
[1]Electrical Communication Engineering, Indian Institute of Science, Bangalore, India
[2]Materials Research Centre, Indian Institute of Science, Bangalore, India

As interest in the electromagnetic spectrum expands towards the infrared and terahertz range, the distinct advantages of using semiconductors instead of metals for plasmonic applications must be understood. Plasmonic resonances in gold (Au) and indium nitride (InN) gratings are studied, ... Read More

Towards a Microscopic Model for Species Transport in Lithium-Sulphur Cells

Geraint Minton [1], Rajlakshmi Purkayastha [1], Laura O’Neill [1], Sylwia Walus [1], Mark Wild [1], Monica Marinescu [2], Teng Zhang [2], Gregory Offer [2],
[1] Oxis Energy Ltd, Abingdon, Oxfordshire, UK
[2] Mechanical Engineering Department, Imperial College, London, UK

Lithium-sulphur (Li-S) batteries have the potential to surpass the energy storage capability of Li-ion batteries due to their high theoretical gravimetric energy density of 2700 Wh/kg. However, the processes which drive the system behaviour are much more complex than those in a Li-ion ... Read More

Modeling Light Propagation in Skin for Visualization of Subcutaneous Veins

H. Kwon[1], R. Huancaya[1]
[1]Andrews University, Berrien Springs, MI, USA

Vein visualization systems such as the VeinViewer are vein-contrast enhancement devices that use an infrared camera to highlight blood or the underlying vasculature and project the image in real time onto the skin. Understanding the light propagation in a realistic skin model is ... Read More

Analysis of Cost Effective Vertical Axis Wind Turbine (CEVAWT)

H. Shaikh[1], A. Arjun[1], R. Kumbhar[2]
[1]SVERI's College of Engineering, Pandharpur, Maharashtra, India
[2]WIL Walchandnagar, Pandharpur, Maharashtra, India

Wind turbines are the conventional type of energy source. The main focus of this work is the analysis and fabrication of cost effective VAWT. Cost of the turbine is reduced by low cost material and minimizing its total weight. There are two main types of the wind turbines i.e. Horizontal ... Read More

First

171–180 of 293

Last