See How Modeling and Simulation Is Used Across Industries
Multiphysics modeling and simulation drives innovation across industries and academia — as is evidenced by the many uses showcased in the technical papers and posters presented by engineers, researchers, and scientists at the COMSOL Conference each year.
Draw inspiration from the recent proceedings collected below, or, to find a specific presentation or filter by application area or conference year/location, use the Quick Search tool.
View the COMSOL Conference 2025 Collection
The paper addresses a class of problems for modeling and consequently simulating the electromagnetic field radiation pattern from two arms Archimedes spiral coils. The frequency spatial wavelengths relative to the coil dimensions are in a range where the electromagnetic Maxwell’s ... Read More
The paper describes how the fluxgate current sensor works and how it is built in the COMSOL Multiphysics® software. Four COMSOL® modules were used: -AC/DC Module: the magnetic field physic is used in order to apply the Ampere-Maxwell’s law to the different sensor components and to the ... Read More
Priyam Bhavsar, Rakesh Deore2, Karuna Kalita 2 1. Department of Physics, IIT Guwahati, Guwahati, AS, India. 2. Department of Mechanical Engineering, IIT Guwahati, Guwahati, AS, India. This paper investigates different pole configurations and their impact on passive radial magnetic ... Read More
Induction motors have wide applications in industries, so they are prone to faults, which later result in vibrations and hence noise. So it is important to analyze the faults in induction motors, their causes, and their effect on the system. Basically, there are so many faults in ... Read More
Microwave heating has been used in industry because of its pollution free and rapid heating technique [1]. It consists of an electromagnetic wave that passes through a media with a frequency between 300 MHz and 300 GHz [2] to generate heat in the system. The purpose of the current work ... Read More
In the recent years, Rai Research Centre (CRITS) has been involved in investigating solutions to guarantee a satisfactory coverage of Digital Audio Broadcasting (DAB) service, in the 200 MHz frequency band, for challenging scenarios like tunnels. Preliminary field tests receiving the RF ... Read More
This Paper presents the results of a FEM simulation with Comsol Multiphysics for an Axial Flux Permanent Magnet Machine (AFPM) and compares them with analytic calculation methods (Matlab, Siemens Star-CCM Suite) as well as test bench measurements of a manufactured protype. The machine is ... Read More
In general, there is a wide range of applications requiring coupled electromagneticstructural analysis. In this paper, two of such coupled problems have been analyzed. The first one is a transient analysis of Electromagnetic Forming process and the other problem is a deformation analysis ... Read More
Single turn coils produce AC and transient magnetic fields in pulsed magnetic technologies for which magneto-harmonic and transient magnetic analysis can be primarily performed. We suggest studying one single turn coil example made of a conducting massive coil, an optional conducting ... Read More
Vibration-based Piezoelectric Energy harvesters convert ambient vibration energy into an applicable electrical charge for wireless sensors, IoT applications, and charging the battery, which is most important to range improvement of the Electric Vehicle. This study analyses different ... Read More
