See How Multiphysics Simulation Is Used in Research and Development
Engineers, researchers, and scientists across industries use multiphysics simulation to research and develop innovative product designs and processes. Find inspiration in technical papers and presentations they have presented at the COMSOL Conference. Browse the selection below or use the Quick Search tool to find a specific presentation or filter by application area.
View the COMSOL Conference 2024 Collection
The motion of DNA in crowded environments is a common theme in physics and biology. Examples include gel electrophoresis and the self-interaction of DNA within cells and viral capsids. Here we study the interaction of multiple DNA molecules within a nanopore by tethering the DNA to a ... Read More
Harvesting of renewable energy requires efficient energy storage systems. Rechargeable flow batteries offer certain advantages over other energy storage techniques in use, such as the lifting of water, compression of air, flywheel, etc. In a flow battery, electrolyte flowing through ... Read More
Most of existing material representations [1], even including the dynamic hysteresis and iron losses [2], ignore local microscopic non-uniformities. These concern the magnetic structure (domains and walls [3]) and are mainly due to surface effects, anisotropy and exchange [4]. One ... Read More
The results of modeling of thermal fields, stresses, deformations and displacements in formation of an additive structure from structural low alloy steel for welding 09G2S on a substrate are presented. An interdisciplinary research computational package COMSOL Multiphysics® was used for ... Read More
Within the emerging integrative concept of IoT (Internet of Things) and IIoT (Industrial Internet of Things) that are paving the way towards Digital Manufacturing Technologies and the next paradigm shift of Industry 4.0, R&D Laboratories have to be at the forefront of the ... Read More
由于异种金属的热物理性能存在较大差异，在焊接过程中极易形成金属间化合物，这给两种材料的焊接造成了一定的困难。因此，针对钢/铝异种金属焊接存在的难点，建立了基于COMSOL软件的激光-TIG复合热源焊三维瞬态熔池数值分析模型。利用所建模型对不同焊接条件下的激光-TIG复合热源焊熔池形貌和温度场进行模拟计算，分别探讨了激光功率、电弧电流及焊接速度对复合焊焊接温度场的影响规律。 Read More
Silver and gold nanoparticles are widely used in the field of surface enhanced raman spectroscopy (SERS) because of the unique plasmonic properties. Plasmons or surface plasmon resonance result from the wavelength dependent dielectric properties of noble metals like Ag, Au, Pt etc., ... Read More
引言：激光诱导间质肿瘤热疗法是一种可使生物组织局部地方凝结坏死的肿瘤疾病治疗方法，目前已经用于肝、脑等各部位的肿瘤治疗[1-2]。为了更好地进行肿瘤疾病的治疗，需要实时地对组织的温度和热损伤进行监控，而检测技术很难实现对肿瘤治疗过程的实时监测，故数值计算成为研究光热疗法的有力工具[2-6]。本模型将生物组织光传输的物理场与热传输的物理场相耦合，考虑组织光热参数随温度变化的情况，研究了肿瘤周围含有大动脉的情况时组织的温度分布随时间的变化情况，研究结果对指导临床医学肿瘤治疗有重要意义。 COMSOL Multiphysics® 的软件使用： 几何模型：如图1所示 ... Read More
The generation of terahertz frequency radiation (0.1-10 THz) is an important technological goal due to the use of this non-ionizing radiation to penetrate a wide range of non-conducting materials. One outstanding problem has been the propagation of THz radiation in guided wave devices. ... Read More
基于 Level-Set 界面跟踪方法建立了激光熔覆过程的三维瞬态数值模型，研究了瞬态熔化和凝固过程中传热传质的演化规律。该模型使用 Level-Set 方法跟踪熔池气/液界面，采用焓－多孔度（enthalpy-porosity）方法得到了固/液界面之间的糊状区，并考虑了质量添加、材料熔化/凝固、热毛细效应（Marangoni效应）、浮力效应、活性元素质量传输等对熔池流动和界面的影响。通过该模型，具体分析了质量添加、力和界面平衡条件对熔池气/液界面的影响，以及由熔池温度/浓度分布引起的热毛细效应、金属材料的熔/凝过程和熔池流动形式对熔池固/液界面的影响。结果表明 ... Read More