Technical Papers and Presentations

Atherosclerosis in arteries is caused by the formation of stenosis : fatty depositions, on the artery wall. In current medicine, the practice is to observe the maximum percentage occlusion at any arbitrary cross-section and diagnose the patient on that basis, which might not always ... Read More

Direct numerical simulation of single- and two-phase flow in real pore systems is addressed in our paper. The X–ray computed micro-tomography technique has been applied first to reconstruct in details a real pore space of a subcentimetric sample. Making use of dedicated software (ScanIP) ... Read More

Pressure-driven air flow is directed over the microfluidic cavity induces circulating fluid motion in the cavity. Analyte contained in the air stream is absorbed into the cavity, mixes with the nanoparticles as a result of the circulating cavity flow. Therefore, the nanoparticles ... Read More

The flow field of a coaxial jet with the internal (primary) flow being subsonic and the external (secondary) flow being supersonic has been investigated with COMSOL Multiphysics® software. We used the results to correct defects in the nozzle geometry and we evaluated the effect of heat ... Read More

This paper presents and discusses HazRes’ research and results associated with the simulation and modelling of hydrogen release and dispersion events in indoor enclosed environments, using COMSOL Multiphysics. HazRes has developed a gas dispersion model in COMSOL, which takes into ... Read More

A synthetic Jet actuator is a device which moves a fluid in and outside a cavity, through a small aperture, by the continuous oscillation of a diaphragm. The multiphysics interaction between the piezoelectric disk, which deforms due to the alternating voltage, and the fluid makes COMSOL ... Read More

A microwave heating model coupled with heat, mass, and momentum transfer is needed to fully understand the microwave heating process. In this study a comprehensive 3D model was developed for studying the interaction of microwave with the food. The model includes physics of Maxwell’s ... Read More

Organogenesis is a tightly regulated process that has been studied experimentally for decades. We are developing mechanistic models for the morphogenesis of limbs, lungs, and kidneys with a view to integrate available knowledge and to better understand the underlying regulatory logic. ... Read More

Classical hydraulic dampers are flexible devices that are used to attach a component to a mounting base. Vibration amplitude reduction can be achieved by improving the old technique of suspension by bringing in application of Magnetorheological or Electrorheological fluid in it. Due to ... Read More

Metal foams are interesting materials with many potential applications in engineering. Foamed metals or alloys include gas voids in the material structure with the real possibility to modify ad hoc their physical properties. Following our previous efforts aimed to simulate and study the ... Read More