See How Modeling and Simulation Is Used Across Industries
Multiphysics modeling and simulation drives innovation across industries and academia — as is evidenced by the many uses showcased in the technical papers and posters presented by engineers, researchers, and scientists at the COMSOL Conference each year.
Draw inspiration from the recent proceedings collected below, or, to find a specific presentation or filter by application area or conference year/location, use the Quick Search tool.
View the COMSOL Conference 2025 Collection
The good electrical, thermal, mechanical and chemical properties of solid organic dielectrics, such as PTFE, predestine them as good candidates for the electrical insulation of transport devices and systems. In the particular case of power converters involved in the future hybrid and ... Read More
A two-dimensional numerical simulation study has been performed to model an electrohydrodynamic (EHD) micropump. The emphasis of this study was on simulating the effect of the different geometric design parameters on the micropump pressure head and volume flow rate. The simulated design ... Read More
Capacitive MEMS (Micro-Electro-Mechanical Systems) accelerometers may be directly soldered to the printed circuit board by an array of solder balls. Differences in the thermal expansion coefficients of the pertinent materials cause deformations of the accelerometer under temperature ... Read More
A COMSOL model of a piezoelectric quartz double ended tuning fork gyroscope was implemented. The gyroscope has two detection modes; the first mode detects the angular velocity about a z-axis perpendicular to the tuning fork plane (x-y plane), while the second mode detects the angular ... Read More
In this work we present the simulation of a micro-scale large displacement compliant mechanism called the Tsang suspension. It consists of a flat micro-plate anchored down by two springs on either side, that can rotate out-of-plane and maintain its vertical assembly by a simple single ... Read More
This paper presents and discusses HazRes’ research and results associated with the simulation and modelling of hydrogen release and dispersion events in indoor enclosed environments, using COMSOL Multiphysics. HazRes has developed a gas dispersion model in COMSOL, which takes into ... Read More
In this study, COMSOL Multiphysics® software was used to simulate the surface response to excitation method (SuRE). An aluminum beam with a piezoelectric element bonded is modeled using the COMSOL Acoustics Module. A frequency domain sweep study was performed to simulate the sweep sign ... Read More
Large centrifugal compressors, which are commonly applied in the oil and gas and in the process industry, may fail due to vibrations of the impeller. These vibrations are induced by pressure pulsations in a compressor stage. These vibrations can be especially strong in so-called dense ... Read More
Presented work is motivated by pre-realization phase of rock heating experiment in underground, testing properties for cyclic energy storage. Heating unit, installed in large borehole from end of a tunnel, is fixed to the rock face with the geo-polymer. Rest of the borehole is filled ... Read More
This paper presents the design and analysis of a high power radial flux Brushless DC motor for electro-mechanical actuation system. The motor is used for driving an electro-mechanical actuator of 20 ton capacity. Surface mounted, radially magnetized permanent magnet design is mostly ... Read More
