See How Modeling and Simulation Is Used Across Industries
Multiphysics modeling and simulation drives innovation across industries and academia — as is evidenced by the many uses showcased in the technical papers and posters presented by engineers, researchers, and scientists at the COMSOL Conference each year.
Draw inspiration from the recent proceedings collected below, or, to find a specific presentation or filter by application area or conference year/location, use the Quick Search tool.
View the COMSOL Conference 2025 Collection
The ceramic metal halide lamps belong to the most efficient high intensity light sources of these days. Presently it is the nitrogen contamination that causes the most significant problems during ignition. If this material gets into the lamp's interior in high concentrations, it will ... Read More
Three efficient alternatives to the model in COMSOL’s thermoacoustics interface are presented. The higher efficiency of these models are explained from theory and are demonstrated by means of two examples. Read More
Transformers, as any other industrial products, have to comply with various requirements on noise levels. Three main sources of noise can be identified in transformers: no-load noise or core noise generated by magnetostriction in the core steel laminations, load noise produced by ... Read More
Water removal during paper manufacturing is an intensive energy process. The dewatering process generally consists of four stages in which the first three stages, water is removed mechanically through vacuum pulses and pressing.The fourth stage involve thermal drying. The vacuum ... Read More
The transient behavior of the thermal resistance of single and double U-tube borehole heat exchangers (BHEs) is investigated numerically by means of COMSOL Multiphysics® software with reference to the 2D cross section of usually employed BHEs. The study is performed in a dimensionless ... Read More
Metal foams are interesting materials with many potential applications. They are characterized by a cellular structure represented by a metal or metal alloy and gas voids inside (Fig.1). A common metallic cellular material is aluminum foam which can be produced metallurgically by heating ... Read More
Electropolishing is an electrochemical process that radiofrequency accelerating cavities undergo in order to improve their inner metal surface finishing. This is performed prior to their installation into particle accelerators, in order to enhance their accelerating properties. Using ... Read More
The goal of this research is to provide the medical staff with a numerical system assessment of wall shear stress in carotid bifurcation. Through this model, it will be fundamental to investigate the stress state properties of the surface in contact between the plaque and the artery, and ... Read More
This paper describes the Virtual Prototype of a Dielectric Window or High Power Microwave Vacuum Tubes and Linear Accelerators. Design formulas are provided and Computer Aided Design techniques based on COMSOL Multiphysics® software are proposed. The virtual prototype considers the ... Read More
Results of simulations on flow and heat transfer in a porous Silicon Carbide honeycomb structure applied as a solar air receiver are presented. In this application porous materials are put in concentrated solar radiation. Flux densities of up to 1000 MW/m² are reached. Simultanously, ... Read More
