Technical Papers and Presentations

Quick Search

Resources

White Papers and Application Notes

See How Multiphysics Simulation Is Used in Research and Development

Engineers, researchers, and scientists across industries use multiphysics simulation to research and develop innovative product designs and processes. Find inspiration in technical papers and presentations they have presented at the COMSOL Conference. Browse the selection below or use the Quick Search tool to find a specific presentation or filter by application area.

View the COMSOL Conference 2024 Collection

Search Term:

Simulation of Slag/Gas and Slag/Iron Interface Tilting in Blast Furnace Hearth During Slag Tapping

Y. Kaymak [1], T. Hauck [1], R. Lin [2] , H. Rausch [2]
[1] VDEh Betriebsforschungsinstitute GmbH, Düsseldorf, Germany
[2] AG der Dillinger Hüttenwerke, Dillingen, Germany

The blast furnace hearth drainage constitutes a major part of the blast furnace operation. Especially, keeping track of the iron and slag levels is crucial to adapt the tapping strategy. The operational target is usually not only to empty the blast furnace as far as possible but also to ... Read More

Pore-Level Influence of Contact Angle on Fluid Displacements in Porous Media

H. Ali Akhlaghi Amiri[1]
[1]University of Stavanger, Stavanger, Norway

Wettability affects two-phase displacements in porous media by determining the microscopic distribution of fluids in pore spaces. The impact of wettability on transport properties at macro-scales has been widely addressed in literature; however a deeper understanding of wettability ... Read More

Liquid Microlenses with Adjustable Focusing and Beam Steering For Single Cell Optogenetics

S. Berry [1], S. Redmond [1], P. Robinson [1], T. Thorsen [1], M. Rothschild [1], E. S. Boyden [2, 3]
[1] Massachusetts Institute of Technology - Lincoln Laboratory, Lexington, MA, USA
[2] Department of Biological Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA
[3] Department of Brain and Cognitive Sciences, Massachusetts Institute of Technology, Cambridge, MA, USA

In optogenetics research it is highly desirable to have a method that can deliver light and excite individual neurons in the brain in a controllable and single cell manner. Working toward this goal, we are developing liquid microlenses with active electronics that enable both focusing ... Read More

Numerical Investigation Of Non-Newtonian Emulsion Formation At Microfluidics T-Junction

W. V. Loong [1]
[1] SEGi University, Malaysia

The main focus of the present study is the parametric investigation of the influence of viscosity on breakup dynamics of the non-Newtonian sodium carboxymethylcellulose (CMC) droplets. It presents the numerical simulations of the fluid dynamics of CMC droplets with shear-thinning ... Read More

External Field Induced Flow Patterns in Microscale Multiphase Flows

D. Bandyopadhyay[1], A. Sharma[1], S. Timung[1], V. Tiwari[1], T. K. Mandal[1]
[1]Department of Chemical Engineering, Indian Institute of Technology Guwahati, Guwahati, Assam, India

The study of multiphase flows inside the microfluidic devices has received much attention recently because of its applications in heat and mass transfer, mixing, microreaction, emulsification and most importantly in MEMS and lab-on-a-chip. We study the influence of an electric field on ... Read More

CFD Analysis of a Macroscale Ultrasonic Separator

K. Chitale [1], B. Lipkens [1, 2], W. Presz, Jr. [1],
[1] FloDesign Sonics Inc., Wilbraham, MA, USA
[2] Western New England University, Springfield, MA, USA

Macroscale ultrasonic separation is a new filtration technology, with various applications such as cell clarification, cell therapy, blood-lipid separation, oil-water separation etc. These systems use piezoelectric transducers to create standing waves in fluid-particle mixture. Suspended ... Read More

Push or Pull, How Does Silk Flow?

J. Sparkes [1],
[1] University of Sheffield, Sheffield, UK

Silk is one of the longest used and most recognizable textiles that we, as a society, use regularly. We see it as a luxury good, worn as an indicator of success and value. However, despite mankind having domesticated and farmed silkworms for millennia, we still know relatively little ... Read More

Digital Microfluidic Droplet Adapter for Interconnection of Biochips

R. Zhu[1], X. Xiong[2], P. Patra[1], C. Jin[1], J. Hu[3]
[1]Department of Biomedical Engineering, University of Bridgeport, Bridgeport, CT, USA
[2]Department of Electrical & Computer Engineering, University of Bridgeport, Bridgeport, CT, USA
[3]Department of Mechanical Engineering, University of Bridgeport, Bridgeport, CT, USA

In this research, we use the COMSOL Multiphysics® software to design and simulate a digital microfluidic droplet adapter for board-level biochip integration. Digital Microfluidic Biochip (DMFB) has gained tremendous research interest in recent years due to its importance in Lab-on-a-Chip ... Read More

Combining Multiphysics Modeling and Solution Thermodynamics Using M4Dlib, an External Library

T. Marin-Alvarado [1],
[1] M4Dynamics, Toronto, ON, Canada

An external library, M4Dlib [1], has been developed to solve multiphysics problems coupled to solution thermodynamics. This approach extends the local equilibrium concept[2] to multiphysics modeling by incorporating a full Gibbs energy minimization routine at each numerical node to ... Read More

Simulation of the Cooling and Phase Change of a Melt-Cast Explosive

W. Sanhye [1], C. Dubois [1], P. Pelletier [2], I. Laroche [2],
[1] Department of Chemical Engineering, École Polytechnique de Montréal, Montréal, QC, Canada
[2] General Dynamics Ordnance and Tactical Systems-Canada Inc., Repentigny, QC, Canada

Introduction Numerical modeling of melt-casting is becoming a popular tool for the energetic materials and explosives industry. Compared to traditional metal casting, the cooling cycle for explosive melts is significantly longer because of their high Prandtl numbers [1]. Improving the ... Read More

First

61–70 of 132

Last