See How Modeling and Simulation Is Used Across Industries
Multiphysics modeling and simulation drives innovation across industries and academia — as is evidenced by the many uses showcased in the technical papers and posters presented by engineers, researchers, and scientists at the COMSOL Conference each year.
Draw inspiration from the recent proceedings collected below, or, to find a specific presentation or filter by application area or conference year/location, use the Quick Search tool.
View the COMSOL Conference 2025 Collection
During semiconductor manufacturing, finished silicon microchips need to be released from a carrier tape they stick to by an adhesive. This is done by vacuum forces that (a) hold the chip flat from above and (b) pull the tape off from the chip underside. Sounds simple, but is very tricky ... Read More
As a general definition, the presence of any repeated motion after a regular interval of time is known as vibrations. The basic theory of vibrations is described by the system of forces acting on a moveable and deformable body. The natural phenomena existing in the universe such as ... Read More
This work presents new Fluid-Structure Interaction (FSI) models in both 2D and 3D of the effect of using vascular stents as treatment of cerebral berry aneurysms. The stent is positioned inside the cerebral artery covering the neck of the aneurysm. The stent is expected to alter the ... Read More
Cantilever vibration in fluid environment is probably one of the most common Fluid Structure Interaction problems in the field of Micro/Nano Electro Mechanical Systems. Usually the effect of fluid on cantilever oscillation is characterized in terms of mode resonance frequencies and ... Read More
This paper presents model development and simulation results for a microdroplet generator capable of internally measuring the volume of dispensed droplets. The system’s integrated sensing is enabled by storing compressible gas adjacent to the dispenser’s liquid reservoir. During ... Read More
The presented paper describes a method for micro precision assembly of very small objects like future microchips, which have a lateral expansion equal to or smaller than 500 μm. The modelling and simulation of a fluidicbased micro assembly method for a microchip with a dimension of ... Read More
Atherosclerosis is a disease that narrows, thickens, hardens and restructures a blood vessel due to substantial plaque deposit. In the Carotid Artery, the decision to treat using endarterectomy and stenting is determined by the velocity as measured by Doppler flow in the common Carotid ... Read More
The approach of this project is Modeling a Coriolis Mass Flow-meter (CMF) bases on a Fluid-Structure Interaction (FSI) device. The "Coriolis mass flow-meter sensor" is modeled using COMSOL Multiphisics® simulation, the Acoustic-Shell Interaction physics interface and coupled by FSI ... Read More
Fluids used in biomedical microelectromechanical systems (BioMEMS) devices often exhibit very different flow behavior from those in bulk solutions, which in turn affects the behavior of cells and biomolecules in the device. In this work, we investigate an integrated microfluidic system ... Read More
Cross-flow around a group of cylinders is a very common phenomenon in engineering, such as flow around heat exchanger tube arrays. The cross-flow-induced vibration might cause a reduction of equipment life and might even lead to the occurrence of severe accidents. Hence, it is necessary ... Read More
