Engineers at Sogin S.p.A. Simulate Nuclear Waste Storage Approaches
G. Barbella, P. Geraldini
Sogin, Italy
Nuclear sites in Italy are being decommissioned, leaving questions about how to safely manage and store radioactive waste. Nuclear waste can be stored temporarily in steel drums encased in concrete, but environmental factors must be carefully controlled to prevent corrosion of the steel. It is difficult to constantly monitor the corrosion process, and the relative humidity in the storage area must be kept below 65 percent. However, normal HVAC systems are an impractical solution in this case because of the operating costs, the need for regular maintenance, and the reduction they would cause to the available storage space. Engineers at Sogin S.p.A. turned to simulation to shed light on these requirements and ways to meet them effectively. Industrial isothermal dehumidifiers were chosen as a lower-cost, smaller, and more mobile alternative to HVAC systems. Using COMSOL Multiphysics, the team modeled air flow in the storage area as well as heat and moisture transfer in the room's atmosphere. Based on the results, they were able to determine the optimum layout for the dehumidifying units, reducing the number of units needed as well as the risk of corrosion.
Suggested Stories
Dielectric Stress Simulation Advances Design of ABB Smart Grid-Ready Tap Changers
Consumers of power rely on fairly stable voltages. Transformers contain tap changers which vary the ratio of secondary ...
Designing Tidal Turbines That Are Safe for Marine Life
A guest blogger from Xi Engineering discusses how his organization is using acoustics simulation to study the impacts ...
Inspiring Young Engineers to Design for the Future at EPFL
EPFLoop, from the Swiss Federal Institute of Technology Lausanne (EPFL), designed their pod for the 2018 SpaceX ...
Powering Offshore Wind Farms with Numerical Modeling of Subsea Cables
Hellenic Cables uses finite element modeling to analyze and validate underground and subsea cable designs for use in ...
