ABB AG Uses Simulation to Verify Designs for a More Reliable Recloser
O. Craciun, and colleagues
ABB AG
Ladenburgh, Germany
When a tree branch touches overhead cables and causes a momentary short circuit, your lights may flicker. A device called a recloser ensures that power to your home is not cut off for a longer period.
ABB AG, a leading manufacturer in power technology, is working towards designing a more reliable recloser. One objective in this design process was to optimize the size of the permanent magnet while ensuring excellent switching properties.
To do this, ABB AG created a 2D simulation using the AC/DC Module and calculated the magnetic flux density. Next, they used the electrical circuit feature to couple the actual power amplifier schematic and component values to the magnetic simulation. Finally, the results were fed into optimization software to select the appropriate size magnet and imported back into COMSOL Multiphysics software using LiveLink™ for MATLAB® to verify the design in a 3D model.
Suggested Stories
Picking the Pattern for a Stealth Antenna
Stealth airplanes and ships avoid radar detection by optimizing the shape of surfaces to reflect away from the radar ...
Dielectric Stress Simulation Advances Design of ABB Smart Grid-Ready Tap Changers
Consumers of power rely on fairly stable voltages. Transformers contain tap changers which vary the ratio of secondary ...
Multiphysics Simulations Enable Development of Fast, Cheap MEMS-Based Bacteria Detector
Professor Mark Reed and his team at Yale University are using COMSOL Multiphysics to develop a MEMS-based solution for ...
Generative Design Puts Hydrogen Fuel Cell Development in High Gear
Toyota Research Institute of North America (TRINA) is working on hydrogen-powered vehicles. The TRINA team is using ...
