Rautaruukki Oyj Uses Simulation to Help Fine-Tune Oven Setups
Mika Judin
Rautaruukki Oyj
Hämeenlinna, Finland
Rautaruukki Oyj supplies metal-based components and systems to the construction and mechanical engineering industries, where process engineer, Mika Judin, works with optimizing their coating technologies. When coating rolled metal with paint, it is important that the coating be applied such that it is not discolored or damaged, and that it is applied evenly. Heat transfer therefore needs to be fully understood.
Judin used COMSOL Multiphysics to determine the heat conductivity of the paint during the drying process in a 3D model and then, with this information, to model the whole oven drying process. The models considered heat transfer, a liquid-to-vapor phase change, and a liquid-to-solid phase change.
His analyses made it possible to fine-tune oven setups and provide feedback to paint manufacturers. Using his models, he was also able to achieve a high degree of product uniformity and quality throughout the shifts run by different operators.
Suggested Stories
Meeting Quality Standards in Oil and Gas Extraction with Ultrasonic Transducers
Baker Hughes saves 30% on prototyping costs by using 3D ultrasonic simulations to optimize transducers used for ...
Get an Inside Look at How Veryst Engineering Looks Inside Designs
Step into the material test lab at Veryst Engineering to see how they develop accurate material models for use in ...
Helicon Antenna Supports Nuclear Fusion
Built by engineers at General Atomics, the DIII-D tokamak needs to achieve temperatures that are 10 times hotter than ...
Simulating the Pressure in an Ultrahigh Vacuum System
The ETpathfinder research facility in the Netherlands was built in anticipation of the proposed Einstein Telescope ...
