Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

interface thickness in level set method

Please login with a confirmed email address before reporting spam

Dear friends,

As I know the interface thickness in level set method depends on the parameter which the default value for this parameter is " tpf.hmax/2 ". when I want to reduce the interface thickness by changing this parameter , I have convergence problems and on the other hand by keeping the default value you have to use the fine mesh everywhere which results in memory problems.
i am using version v4.2 but even by using adapting meshing, the interface thickness depends on the maximum element size yet.


what should i do ??

best

1 Reply Last Post Jul 5, 2011, 12:10 p.m. EDT

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jul 5, 2011, 12:10 p.m. EDT
any suggestion ?
any suggestion ?

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.