Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.
Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
Temp field as initial condition
Posted Apr 12, 2012, 3:06 a.m. EDT Heat Transfer & Phase Change, Structural Mechanics Version 4.2a 0 Replies
Please login with a confirmed email address before reporting spam
I am looking at a problem with an oscillating temperature field. The temperature field oscillates from a varying load.
After a short time the behaviour of the temperature field resembles harmonic oscillation.
From this temperature field i would like to calculate elasto-plastic deformations for a single "temperature oscillation". The reason for this is naturally to speed up the computations.
The problem is now: Is it possible to only evaluate elasto-plastic behaviour in a limited time interval?
Say the temperature field stabilises after 1s and the period of the oscillations is ½s. Can i solve the elasto-plastic problem from 1s to 1½s ?
Best regards,
Kristian
Hello Kristian Bonderup Pedersen
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.