Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

RF Signal Input/Transmission Problem

Please login with a confirmed email address before reporting spam

I am working on a 2D model to establish a connection between an input and a receiver antenna, but my S-parameters are positive. Shouldn't they be negative? Is there an error with my lumped port setup or choice of boundary? The transmitted field appears to be radiating behind the input antenna, which is no good (even with PML surroundings).

Would appreciate any feedback and/or suggestions.



1 Reply Last Post Oct 21, 2021, 9:36 a.m. EDT
Robert Koslover Certified Consultant

Please login with a confirmed email address before reporting spam

Posted: 3 years ago Oct 21, 2021, 9:36 a.m. EDT

Well, I agree that graph doesn't look encouraging. I suggest you post your model (the .mph file) to the forum, so that we can all take a look at it and see what is really going on.

-------------------
Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
Well, I agree that graph doesn't look encouraging. I suggest you post your model (the .mph file) to the forum, so that we can all take a look at it and see what is really going on.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.