Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

How to give heat transfer coefficient input that varies with temperature?

Please login with a confirmed email address before reporting spam

I am trying to predict the steel member temperature after being exposed to 1300 °C. I gave thermal properties that vary with temperature as input in material properties. I gave a constant heat transfer coefficient value, But I cannot provide the heat transfer coefficient input that varies with temperature.

The temperature-dependent heat transfer coefficient(hc) expression is given by hc=0.0668T W/m2 °C 0<T<500 °C hc=0.231T-82.1 W/m2 °C T>500 °C (Ref: B Brickstad, B.L.Josefson)

How to give the heat transfer coefficient input that varies with temperature in heat transfer module? Please help me regarding this.

Thanks and regards Mahalingam C


0 Replies Last Post Feb 21, 2022, 5:05 a.m. EST
COMSOL Moderator

Hello Mahalingam C

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.