Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.
How to connect the optical part and the electric part together in Comsol simulation？
Posted Mar 5, 2013, 3:56 a.m. EST 1 Reply
Please login with a confirmed email address before reporting spam
How to connect the optical part and the electric part together in Comsol simulation？
--
CIT-UCB-PKU
1 Reply Last Post Mar 5, 2013, 6:48 a.m. EST
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
what do you exactly mean by optical and electrial. An "optical" wave is an electromagnetic wave, but defined over some limited and given frequency range. So the are identical by "design" or rather by physics.
As you seem to be interested in solar radiation, you need to consider not only wavelength but also random polarisation and the solar spectrum, to be able to convert illumination power to some electrical field power
--
Good luck
Ivar
what do you exactly mean by optical and electrial. An "optical" wave is an electromagnetic wave, but defined over some limited and given frequency range. So the are identical by "design" or rather by physics.
As you seem to be interested in solar radiation, you need to consider not only wavelength but also random polarisation and the solar spectrum, to be able to convert illumination power to some electrical field power
--
Good luck
Ivar