Technical Papers and Presentations

Quick Search

Resources

White Papers

See How Multiphysics Simulation Is Used in Research and Development

Engineers, researchers, and scientists across industries use multiphysics simulation to research and develop innovative product designs and processes. Find inspiration in technical papers and presentations they have presented at the COMSOL Conference. Browse the selection below or use the Quick Search tool to find a specific presentation or filter by application area.

View the COMSOL Conference 2024 Collection

Search Term:

Theoretical Study of Phase and Amplitude Characteristics of Microwave Coplanar Delay Line Containing Thin Ferroelectric Layer

V. Nikolaevtsev[1], S. Yankin[2], S. Suchkov[1], D. Suchkov[1], A. Litvinenko[1]
[1]Saratov State University, Saratov, Russian Federation
[2]Joint International Laboratory LICS/LEMAC, IEMN UMR CNRS 8520, EC Lille, France

We theoretically studied the microwave coplanar line of different geometry based on MgO substrate with a thin (30 nm) ferroelectric layer under the external electric field using the environment of 3D modeling in COMSOL Multiphysics®, RF Module, Frequency Domain. Frequency dependence of ... Read More

A Flow and Transport Model in Porous Media for Microbial Enhanced Oil Recovery Studies Using COMSOL Multiphysics® Software

M. A. Diaz-Viera [1], A. Ortiz-Tapia [1],
[1] Mexican Petroleum Institute, Mexico City, Mexico

A flow and transport model in porous media was implemented in COMSOL Multiphysics® software to simulate, analyze and interpret Microbial Enhanced Oil Recovery (MEOR) processes at core scale under laboratory conditions. The flow model is biphasic and is based on the oil phase pressure ... Read More

Analysis Of Particle Trajectories For Magnetic Drug Targeting

A. Heidsieck, and B. Gleich
Zentralinstitut für Medizintechnik, TU München, München, Germany

The technique of magnetic drug targeting binds genetic material or drugs to superparamagnetic nanoparticles and accumulates them via an external magnetic field in a target region. However, it is still a challenge for this approach to succeed in areas with high flow rates, like the aorta ... Read More

Investigation on Sensor Fault Effects of Piezoelectric Transducers on Wave Propagation and Impedance Measurements

I. Buethe[1], C.-P. Fritzen[1]
[1]University of Siegen, Institute of Mechanics and Control Engineering-Mechatronics, Siegen, Germany

For active Structural Health Monitoring (SHM), one popular sensor type is the piezoelectric wafer active sensor (PWAS) due to its multi-purpose application as actuator and sensor and its low cost. It is used to generate a wave field, which interacts with the structure and is recorded by ... Read More

Extraction of COM Parameters and Quality Factor of One Port SAW Resonator Using FEM Based Simulation

A. K. Namdeo[1], H. B. Nemade[1]
[1]Department of Electronics and Electrical Engineering, Indian Institute of Technology Guwahati, Assam, India

The paper presents a method of extraction of coupling of modes (COM) parameters for a one port surface acoustic wave (SAW) resonator from the results of finite element analysis in COMSOL Multiphysics®. The COM parameters calculated are electromechanical coupling coefficient, reflection ... Read More

Simulation of Deformed Solid Particles in Constrained Microfluidic Channel

M. Cartas-Ayala[1], R. Karnik[1]
[1]Massachusetts Institute of Technology, Cambridge, MA, USA

Characterization of particles has numerous applications in science and diagnostics. Recently, particle passage through constrained microchannels has been proposed to characterize particles based on their passage velocity. Nevertheless, there is no clear understanding of how the physics ... Read More

Heat Propagation Improvement in YBCO-Coated Conductors for Superconducting Fault Current Limiters

D. M. Djokic[1], L. Antognazza[1], M. Abplanalp[2], M. Decroux[1]
[1]DPMC, University of Geneva, Geneva, Switzerland
[2]ABB Corporate Research Centre, Dättwil, Switzerland

YBCO Coated Conductors (CCs), used for applications in Resistive Superconducting Fault Current Limiters (RSFCLs), are known to have insufficiently high Normal Zone Propagation Velocity (NZPV) during quench events. The improvement can be made by enhancing the thermal conductivity of YBCO ... Read More

Numerical Simulation of Magnetic Drug Targeting with Flow – Structural Interaction in an Arterial Branching Region of Interest

A. Morega, A. Dobre, and M. Morega
University Politehnica of Bucharest, Bucharest, Romania

We report a numerical study on the blood – magnetic carrier aggregate flow in an external magnetic field, for applications such as magnetic drug targeting. The arterial system morphology is complex and patient-related therefore more realistic numerical simulations request medical image ... Read More

Multiphysics Modeling of Electro-Optic Devices

J. Toney
Srico, Inc.
Columbus, OH

Designers of electro-optic modulators and related devices often use separate tools to study the optical and electrical portions of the device. The flexibility of COMSOL Multiphysics makes it possible to construct unified models of EO phenomena including realistic waveguide profiles and ... Read More

Modeling Microwave Heating During Batch Processing of a Liquid Sample in a Single Mode Cavity

S. Curet [1], F. Bellicanta Begnini [1], O. Rouaud [1], L. Boillereaux [1]
[1] L’UNAM Université, ONIRIS, CNRS, GEPEA, Nantes, France

The use of microwaves for heating purposes of dielectric materials is encountered in many industrial applications (food processing, chemistry, material engineering and medical applications). In most of these thermal applications, the prediction of the temperature evolution within the ... Read More

First

421–430 of 1344

Last