See How Modeling and Simulation Is Used Across Industries
Multiphysics modeling and simulation drives innovation across industries and academia — as is evidenced by the many uses showcased in the technical papers and posters presented by engineers, researchers, and scientists at the COMSOL Conference each year.
Draw inspiration from the recent proceedings collected below, or, to find a specific presentation or filter by application area or conference year/location, use the Quick Search tool.
View the COMSOL Conference 2025 Collection
In this project, we report a design of MEMS microphone that is based on the application of porous silicon in improving the sensitivity of bulk micro machined capacitive pressure sensors. The property of a low Young’s modulus of porous silicon and its dependence on porosity have been ... Read More
In this work, we seek to simulate SAWs for a better understanding and to benchmark the currently available cloud computing possibilities of COMSOL Multiphysics® software. By using the MEMS module we demonstrate 3D models with reduced geometry to achieve principle information about the ... Read More
There is a practical interest among composite materials manufacturers to high-speed accurate non-destructive evaluation (NDE) technology for voids inspection when these voids are natural components of such complex structures like resin insulated layer of double-sided copper-clad ... Read More
电阻抗成像（EIT）技术由于分辨率较低受到专家学者的诟病，而EIT与超声技术两者的结合以及 EIT 与磁共振技术两者的结合可以提高成像的分辨率，但仍分别存在电极射频屏蔽效应以及分辨率难以进一步提高等问题。本文将磁共振成像技术和磁声电技术优势互补，采用低频振动进行激励，提出了一种新的动电成像方法，并采用 COMSOL 软件建立了二维仿真模型，使用 PDE 模式对动电阻抗成像的正问题进行了仿真研究，利用 COMSOL 的仿真结果结合Matlab软件进行了反演，实验结果可以反映出仿真模型内部的电导率分布，能够解决上述电阻抗成像结合技术存在的问题。 Read More
Shear wave elastography is an innovative technique used in combination with the traditional ultrasound imaging to improve the specificity of cancer imaging. A two-dimensional finite element model (FEM), composed of realistic boundary conditions, was developed in COMSOL Multiphysics® to ... Read More
This paper reports the structural solid mechanic simulation of a MEMS out-of-plane platform that provides thermal and electrical isolation for a device built on it. When assemble, the platform lifted for approximately 400 μm above the substrate level. A mechanical stress analysis is then ... Read More
The present work focuses on the use of piezoelectric materials as actuators for shape control of composite laminates such as Lead Zircronate Titanate (PZT), and other piezoelectric fiber composites such as Active fiber composites (AFCs), Microfiber Composites (MFCs) which allow for ... Read More
The silicon cantilever with the planar coil was applied to the magnetic flux density measurements. The influence of shape and dimensions of planar coil on magnetic energy density was described. In cause of magnetic anisotropy of analyzed silicon structure FEM method and couple field ... Read More
In this work we present the simulation of a micro-scale large displacement compliant mechanism called the Tsang suspension. It consists of a flat micro-plate anchored down by two springs on either side, that can rotate out-of-plane and maintain its vertical assembly by a simple single ... Read More
Various research activities are happening around the world on harvesting energy from green energy sources to satisfy the power requirements. Being an abundant form of green energy acoustic energy harvesting has been gaining importance despite the low power density of its sources. In ... Read More
