Alexandra Foley | December 4, 2013

In the past, we’ve discussed a few of the extraordinary uses of 3D printing (or additive manufacturing) technology by some innovative engineers, and even printed a few of our COMSOL models. In one of our previous posts on 3D printing, we discussed some of the limitations that this technique poses from both a consumer and manufacturing stand-point — you can only print one material at a time. Now however, as was mentioned in an article in Desktop Engineering, not only […]

Read more ⇢

Article Categories

Fanny Littmarck | July 25, 2013

From supporting research to creating custom prosthesis, what doesn’t 3D printing seem to promise these days? We all know 3D printing has arrived, and the technology is already being put into practice by companies and tech-savvy consumers everywhere. It seems there’s a new 3D printing success story published every day, and no matter how fascinating, it makes you wonder about the wider repercussions and limitations of 3D printing.

Read more ⇢

Article Categories

Daniel Smith | July 11, 2013

There are many necessary steps required in order to create a superior product. Based on some initial (or existing) design, you first need to evaluate the physical characteristics of the system. Once some level of understanding of the system has been obtained, it should then be possible to refine and optimize the design based on some reasonable choice of a figure of merit for a good design. The final stage is to prototype the design, which is where 3D printing […]

Read more ⇢

Article Categories

Daniel Smith | June 25, 2013

Quite often we get asked the question “can I 3D print my COMSOL model?” Well, as of version 4.3b, the answer is “yes!” This is because it is now possible to export geometries and meshes as STL files, which is one of the standard file formats for 3D printing. This allows for rapid prototyping of designs; there is no need to outsource parts to machine shops. It is quite remarkable that you could conceive, simulate, optimize, and prototype a design […]

Read more ⇢

Article Categories

Fanny Littmarck | May 31, 2013

It’s been almost a year since we declared 3D printing the hottest topic in manufacturing, and it hasn’t cooled off yet. If anything, 3D printing has seen a recent surge in popularity. By now you’ve heard a lot about the technology and what you can print with it, but did you know you could print invisibility cloaks this way, too?

Read more ⇢

Article Categories

Phil Kinnane | August 8, 2012

I have previously blogged about 3D printing and how it would be great if you could go from model to product in one step. Now it seems as though the Stereolithography (STL) file format is reaching its limits for being useful as a standard for this type of application. The printers themselves, and what they are capable of, are outstripping the abilities of the file formats to support their new capabilities. Moves are being made to develop a better file […]

Read more ⇢

Article Categories

Fanny Littmarck | July 27, 2012

Additive manufacturing, or 3D printing as it is more widely known as, is on everybody’s mind right now. Manufacturing folks, engineers, and even the general public have taken an interest in 3D printing. In other words, this is not just a fascinating phenomenon to those in the industry — additive manufacturing has been generally accepted as the next “cool” thing in manufacturing.

Read more ⇢

Article Categories

Phil Kinnane | May 16, 2012

I am an avid reader of The Economist and always enjoy their coverage of technical and scientific subjects. In their issue from late April, they ran a special insert on Manufacturing and Innovation, which was a great read. One of their articles was a report on 3D printing and how this is actually becoming an integral part of manufacturing in that the actual printing is mass producing parts and components.

Read more ⇢

Article Categories