Blog Posts Tagged Wave Electromagnetics
Guide to Frequency Domain Wave Electromagnetics Modeling
Over the last several weeks, we’ve published a series of blog posts addressing the various domain and boundary conditions available for wave electromagnetics simulation in the frequency domain; as well as modeling, meshing, and solving options. In this blog post, I will tie all of this information together and provide an introduction to the various types of problems that you can solve in the RF and Wave Optics modules.
Simulation Tools for Solving Wave Electromagnetics Problems
When solving wave electromagnetics problems with either the RF or Wave Optics modules, we use the finite element method to solve the governing Maxwell’s equations. In this blog post, we will look at the various modeling, meshing, solving, and postprocessing options available to you and when you should use them.
Modeling of Materials in Wave Electromagnetics Problems
Whenever we are solving a wave electromagnetics problem in COMSOL Multiphysics, we build a model that is composed of domains and boundary conditions. Within the domains, we use various material models to represent a wide range of substances. However, from a mathematical point of view, all of these different materials end up being handled identically within the governing equation. Let’s take a look at these various material models and discuss when to use them.
Modeling Metallic Objects in Wave Electromagnetics Problems
Metals are materials that are highly conductive and reflect an incident electromagnetic wave — light, microwaves, and radio waves — very well. When using the RF Module or the Wave Optics Module to simulate electromagnetics problems in the frequency domain, there are several options for modeling metallic objects. Here, we will look at the Impedance and Transition boundary conditions as well as the Perfect Electric Conductor boundary condition, offering guidance on when to use each one.
Ports and Lumped Ports for Wave Electromagnetics Problems
When using the COMSOL Multiphysics software to simulate wave electromagnetics problems in the frequency domain, there are several options for modeling boundaries through which a propagating electromagnetic wave will pass without reflection. Here, we will look at the Lumped Port boundary condition available in the RF Module and the Port boundary condition, which is available in both the RF Module and the Wave Optics Module.
Using Perfectly Matched Layers and Scattering Boundary Conditions for Wave Electromagnetics Problems
When solving wave electromagnetics problems, it is likely that you will want to model a domain with open boundaries — that is, a boundary of the computational domain through which an electromagnetic wave will pass without any reflection. COMSOL Multiphysics offers several solutions for this. Today, we will look at using scattering boundary conditions and perfectly matched layers for truncating domains and discuss their relative merits.
- COMSOL Now
- Fluid & Heat
- Structural & Acoustics
- Today in Science