Structural Mechanics

Daniel Smith | March 27, 2013

In a previous blog entry I discussed some of the exotic properties of graphene. The fact that graphene consists of a single layer of atoms means the aspect ratio of any graphene-based structure may be very high. High aspect geometries present their own array of modeling challenges.

Read more ⇢
Fanny Littmarck | February 7, 2013

If you’ve studied structural mechanics you’re probably familiar with stories of planes falling out of the sky due to fatigue (no one wants to be the engineer who designed an airplane that crashed…). Jimmy Stewart made a famous movie about that, but different from the usual horror stories of fatigue is the accident in 1919 of a storage tank that burst in Boston, spilling molasses onto the streets at 35 mph (56 km/h). The Boston Molasses Disaster, as it’s referred […]

Read more ⇢
Andrew Griesmer | January 24, 2013

The Structural Mechanics Module has numerous capabilities, enough for a video containing all of them to last days. This video demonstrates one of the many mechanical capabilities of COMSOL Multiphysics, by outlining a Static Linear Analysis. The chosen physics interface for this problem is Solid Mechanics, one of 13 physics interfaces in the Structural Mechanics Module. The video shows step-by-step how to set up the model of a bracket with a standard workflow (i.e. import the geometry, create global parameters […]

Read more ⇢
Fanny Littmarck | January 16, 2013

On January 10th, hundreds of people tuned in to hear COMSOL and Continuum Blue discuss Structural Mechanics simulations in certain industry applications. As promised in my previous blog post on multiphysics modeling webinars happening in 2013, here is a round-up of the event — including a video excerpt detailing three structural analysis examples presented by Continuum Blue.

Read more ⇢
Fanny Littmarck | December 28, 2012

The Pratt truss is one of several different types of truss bridge designs out there. Said to be the oldest type of modern bridge, the truss is simple and lends itself well to analysis. This type of bridge is typically constructed for the use of pedestrians, cars, trucks, trains, and pipelines.

Read more ⇢

Article Categories

Andrew Griesmer | November 29, 2012

Growing older is an inevitable part of life, and with it, our body slowly begins to show that. I recently started wearing eye glasses because my eyesight is weakening. It’s a little unnerving, but I am comforted by the ever-improving technology being produced. My hearing is still fully intact, but the same cannot be said for 17% (36 million) of American adults who report some degree of hearing loss. In most cases, regular hearing aids are sufficient in treating hearing […]

Read more ⇢
Phil Kinnane | November 28, 2012

One of the differences between this year’s COMSOL Conference, and previous years’, is that this year we filmed a lot of it. During the next few weeks we will be publishing some of these videos for those that were there, to enjoy it once again, and for those that weren’t to get a taste of what went on. To kick these all off, I’m proud to present the first keynote video, which takes us to Babel.

Read more ⇢
Phil Kinnane | November 27, 2012

Many of the engineers and scientists that we collaborate with have been in the game for years. All of them are great experts in the applications that they want to model, and many of them are also proficient at computer science — it was not unusual that the first model or simulation of their application was a few lines of code they wrote themselves. Moreover, in a number of situations I’ve come across their application has been so specific that […]

Read more ⇢
Fanny Littmarck | November 12, 2012

December of 1903 marked the commencement of the Age of Powered Flight, and the Wright brothers went down in history. This was a time before personal computers and simulation software existed. Determining the optimal design of their airplane had to be done using physical prototypes and real-life experiments. What had the design looked like if the Wright brothers had been able to use computers and modeling software? Three researchers from Pennsylvania State University sought to find out how the design […]

Read more ⇢
Fanny Littmarck | October 26, 2012

Out of all metals, the most frequently extruded is aluminum. Aluminum extrusion entails using a hydraulic ram to squeeze an aluminum bar through a die. This process will form the metal into a particular shape. Extruded aluminum is used in many manufacturing applications, such as building components for example. The process of shaping metal alloys, like aluminum, can be modeled using COMSOL Multiphysics.

Read more ⇢
Phil Kinnane | October 8, 2012

The release of COMSOL Multiphysics version 4.3a introduces the Fatigue Module to the world of multiphysics modeling. As the diagram below shows, the Fatigue Module is used to perform structural fatigue life computations for both strain-based and stressed-based fatigue. Since the release, I’ve come to realize that this has been a sought-after product for COMSOL users. But why should you simulate fatigue?

Read more ⇢