J. Kapusta, J. Camber, G. Hulkó
Institute of Automation, Measurement and Applied Informatics, Faculty of Mechanical Engineering, STU Bratislava, Slovak Republic
This paper deals with numerical modeling of modular industrial induction heating of steel billets for hot forming applications using the COMSOL Multiphysics. A mathematical model based on Finite Element Method is presented. Design of induction heaters is constantly evolving and improving in terms of electrical and thermal efficiency. In recent years there is a trend of modular designed induction ...
Dr. Singh has been working at the Chemical Engineering Division, Bhabha Atomic Research Centre, Mumbai since 2000. He has a Ph.D. from the Department of Chemical Engineering, IIT Bombay. He is a recipient of the Homi Bhabha Medal of Bhabha Atomic Research Centre in year 2000, Young Engineer Award of the Department of Atomic Energy in year 2008 and Award for Excellence in Thesis Work at IIT ...
V. Ranjan, A. Kumar, G. Prakash, R. Mandal
Department of Mechanical Engineering, Indian School of Mines, Dhanbad, Jharkhand, India
Understanding the flow fields at the micro-scale is a key to develop methods of successfully mixing fluids for micro-scale applications. This paper investigates flow characteristics and mixing of three different geometries in micro-channel. A Circular groove micro mixer has been designed and simulated. One such channel is shown in Figure1. The geometry of the channels taken was rectangular with ...
Simulation of Magnetic Flux Distribution of Stator and Rotor Coil of Superconducting Air Cored Wind Turbine Generator using COMSOL Multiphysics
A. Hazra, G. Konar
Power Engineering Department, Jadavpur University, Kolkata, West Bengal, India
Wind energy is one of the fastest growing renewable energy sources for electricity generation over the past decade. The offshore installation of large-scale wind farms draws huge attention because of better wind profile. Direct drive synchronous wind turbine generators are now a global demand for light weight, compact, large scale wind turbine generators. Among various approaches in designing ...
Design and Analysis of Micro-Heaters for Temperature Optimization using COMSOL Multiphysics for MEMS Based Gas Sensor
V. S. Selvakumar, L. Sujatha
Rajalakhmi Engineering College, Chennai, Tamil Nadu, India
Micro-Heaters are the key components in sub-miniature micro-sensors, especially in gas sensors. The metal oxide gas sensors utilize the properties of surface adsorption to detect changes in resistance as a function of varying concentration of different gases . To detect the resistive changes, the heater temperature must be in the requisite temperature range over the heater area. Hence the ...
Material Selection and Computational Analysis on DOHC V16 Engine’s Mounting Bracket Using COMSOL Multiphysics
M. V. A. Nag
G.R.I.E.T., Hyderabad, AP, India
Reduction of the engine vibration and the dynamic forces transmitting from engine to the automotive body structure has always been an important part of automotive research. Automobile engineers face the task of creating a mechanism to absorb these vibrations and provide a smooth ride. The usage of Motor Mounts is the best solution for dampening the effects of vibrations and oscillations. This ...
K. Basu, P. Ghosh, A. Chanda
School of Bio Science and Engineering, Jadavpur University, Kolkata, West Bengal, India
Jadavpur University, Kolkata, West Bengal, India
According to clinical reports, cardiovascular disease has become a major global healthcare problem. The deposition of fats, cholesterol etc. at the arterials walls causes thrombus formation leading to stenosis and arterial blockage. To tackle this, along with arterial bypass, the use of Cardiovascular Stent is considered promising and effective (in single vessel and bi vessel diseases). While ...
P. Pattanaik, S. K. Kamilla, D. P. Das, S. K. Pradhan
MEMS Design Center, Institute of Technical Education & Research (ITER), Sikhya ‘O’ Anushandhan University, Bhubaneswar, Odisha, India
Process Engineering and Instrumentation Lab, Institute of Minerals and Materials Technology (IMMT), Bhubaneswar, Odisha, India
Dept of ECE, Hi-Tech Institute of Technology, Khurda, Odisha, India
This paper describes the design of an ultrasonic transducer using different lead free piezo-electric materials and evaluates their performance with different glucose levels in the human blood. COMSOL Multiphysics 4.2a was used for the simulation study using 2D axis symmetric model of piezoelectric transducer which was designed with lead free piezoelectric materials such as Barium Sodium Niobate ...
N. R. Mahajan, S. B. Patel, Z. A. Khan
Department of Electrical Engineering, Indian Institute of Technology Hyderabad, Hyderabad, Andhra Pradesh, India
Railgun is an electrically-powered gun that accelerates a conductive projectile along magnetic metal rails. Various factors increase the projectile velocity. Each method has its own advantages and disadvantages. While increasing the projectile velocity, one has to keep in mind the longevity of the rail guns for practical use . Railguns are often damaged after few uses due to the extreme working ...
P. Patel, P. Manohar
Electrical and Electronics Department, M. S. Ramaiah Institute of Technology, Bangalore, Karnataka, India
Micro machined motors are a recent development in the domain of electrical machines. Compared to the conventional electromagnetic motors, micro machined motors offer high torque at lower speed, and are compact in nature. This makes them suitable for applications in the field of microsatellite, biomedical, micro robot, automobile, and auto focusing camera. The present work describes the design ...