Technical Papers and Presentations

Quick Search

Resources

White Papers

See How Modeling and Simulation Is Used Across Industries

Multiphysics modeling and simulation drives innovation across industries and academia — as is evidenced by the many uses showcased in the technical papers and posters presented by engineers, researchers, and scientists at the COMSOL Conference each year.

Draw inspiration from the recent proceedings collected below, or, to find a specific presentation or filter by application area or conference year/location, use the Quick Search tool.

View the COMSOL Conference 2025 Collection

All

Boston 2025

Search Term:

2012 - Boston

A Study into the Acoustic and Vibrational Effects of Carbon Fiber Reinforced Plastic as a Sole Manufacturing Material for Acoustic Guitars

J. O'Donnell[1], G. McRobbie[1]
[1]University of the West of Scotland, Paisley, Scotland, United Kingdom

This study will research a modern design of acoustic guitar by analysis of the vibrational modes. The guitar that will undergo testing has been provided by Emerald Guitars and is solely constructed using Carbon Fiber Reinforced Plastic (CFRP). With the use of COMSOL Multiphysics© the ... Read More

Numerical Simulation of pH-sensitive Hydrogel Response in Different Conditions

M.K. Ghantasala[1], B.O. Asimba[1], A. Khaminwa[1], K.J. Suthar[2], D.C. Mancini[3]
[1]Department of Mechanical and Aeronautical Engineering, Western Michigan University, Kalamazoo, MI, USA
[2]Advanced Photon Source, Argonne National Laboratory, Argonne, IL, USA
[3]Physical Sciences and Engineering, Argonne National Laboratory, Argonne, IL, USA

The understanding of pH-sensitive hydrogel swelling response in different buffer environmental condition is essential for its use in different practical applications. This necessitates its simulation in steady state and transient conditions. This paper mainly deals with the details of ... Read More

Contactless Power and Data Transfer for Multiple Nonlinear Loads

H.P. Schmidt [1], U. Vogl[1]
[1]UAS HAW Amberg-Weiden, Amberg, Germany

For the design of an inductive power and data transfer electromagnetic calculation are carried out. A transfer system is considered for loads that are distributed across some distances. For example, such loads are adjustable speed drives that are found in factory automation and intra ... Read More

Computational Analysis of Evaporation in Tailored Microchannel Evaporators

S. Arslan[1], J. Brown[1]
[1]Lawrence Technological University, Southfield, MI, USA

The rapid increase in power densities of integrated circuits has induced a significant interest in new reliable and high heat flux cooling technologies. The implication of such growth is the increased need for more efficient and more compact cooling mechanisms. Promising research has ... Read More

Modeling of Laminar Flow Static Mixers

N. Elabbasi[1], X. Liu[1], S. Brown[1], M. Vidal[2], M. Pappalardo[2]
[1]Veryst Engineering LLC, Needham, MA, USA
[2]Nordson EFD, East Providence, RI, USA

Laminar flow static mixers are accurate, inexpensive fluid mixing devices that can handle a wide range of fluids and mixing proportions. They have a wide range of industrial applications, especially in the consumer product, pharmaceutical, biomedical, and petrochemical industries. A good ... Read More

Design and Prototyping of a Passive Cold Chain Vaccine Storage Device for Long Hold Times

D. Gasperino [1], O. Yildirim[1]
[1]Intellectual Ventures, Bellevue, WA, USA

In 2010 an estimated 109 million infants were immunized against DTP, which serves as a good proxy for vaccinations in general. At the same time, however, approximately 19.3 million infants worldwide were not reached by routine DTP immunization services. Immunization rates tend to be ... Read More

Simulation of Differential Ion Mobility (DMS) Principle Coupled with Mass Spectrometry in Atmospheric Pressure

F. Sinatra[1], T. Wu[2], A. Avila[2], E. Nazarov[1], T. Evans-Nguyen[1], J. Wang[2]
[1]Draper Laboratory, Tampa, FL, USA
[2]University of South Florida, Tampa, FL, USA

Mass spectrometry is an analytical technique widely used in the scientific community to determine chemical composition of sample compounds. Typically, mass spectrometers perform their analysis under vacuum conditions, though atmospheric pressure mass spectrometers are becoming more ... Read More

COMSOL-based Simulations of Criticality Excursion Transients in Fissile Solution

C. Hurt[1], P. Angelo[2], R. Pevey[1]
[1]Department of Nuclear Engineering, University of Tennessee, Knoxville, TN, USA
[2]Y-12 National Security Complex, Safety Analysis Engineering, Oak Ridge, TN, USA

Simulation of criticality accident transients offers the ability to confirm understanding of critical configurations, bound accident scenarios and aid comprehensive emergency planning. Computational ability to recreate excursion power histories in fissile solution is sought due to the ... Read More

Passive Microsensor Based on LC Resonators for Substance Identification

D.A. Sanz Becerra[1], E.A. Unigarro Calpa[1], J. Osma[1], F. Segura[1]
[1]Universidad de los Andes, Bogotá, Colombia

A scheme for inductive wireless powering and readout of passive LC sensor is presented. The sensor’s inductor is designed as a planar square coil and is used as the power receiving component. The capacitor is connected directly to the inductor and it was designed as an interdigital ... Read More

Modeling Fluid-Induced Porous Scaffold Deformation

J. Podichetty Thribhuvan[1], S.V. Madihally[1]
[1]Oklahoma State University, Stillwater, OK, USA

Utilization of bioreactors to regenerate tissues outside the body has been intensely investigated in functional tissue engineering. Various studies have been performed using computational fluid dynamics (CFD) to understand fluid flow within bioreactors while assuming porous scaffold as a ... Read More

First

71–80 of 143

Last