COMSOL Conference 2025 Proceedings
Collection of Papers, Posters, and Slideshows Accepted by the Program Committee
At the COMSOL Conference 2025, engineers, researchers, and scientists from around the globe showcased their use of modeling and simulation across all major industries and in academia. Use the Quick Search tool to find a specific presentation or filter by topic or event location.
ISBN: 978-1-7364524-3-1
Introduction: A metal film whose thickness is smaller than the skin depth, is of high transmission in the visible and half-transparent in the near infrared. However, when the film is divided into discrete nano-strips (i.e. array), an enhanced anomalous reflection and suppressed ... Read More
In order to satisfy the requirements of modern range measuring technology, photoelectric theodolites gradually develop towards lightweight and minitype design. As a consequence, the mobile theodolite is becoming a hot spot recently. New requirements are raised for the theodolite base ... Read More
In the past decades, equilateral polygonal microcavity lasers with whispering-gallery modes (WGMs) have attracted great attentions due to their potential application in photonic-integrated circuits. Compared to the perfect microdisk without deformation, the polygonal microcavities such ... Read More
Radio frequency (RF) heating have potential as alternatives to chemical fumigation for disinfesting legumes. This study was conducted to investigate the feasibility of RF selective heating of insect larvae in 3 kg soybeans packed in a rectangular plastic container using a 6 kW, 27.12 MHz ... Read More
A computer simulation model was developed using finite element-based commercial software, COMSOL Multiphysics®, to simulate temperature distributions in wheat samples packed in a rectangular plastic container and treated in a 6 kW, 27.12 MHz RF system with and without mixing conditions. ... Read More
基于电化学-热耦合模型，模拟了常温条件下 LiFePO4 /Graphite 锂离子电池的放电过程，并对电池内部正负电极各个位置的电化学反应速度演化规律进行了模拟计算研究。结果表明：放电过程中电极各处的反应速率不同，且是动态变化的。 Electrochemical Thermal Model Based Research for Electrochemical Performance of Lithium Ion Batteries Jia Ming, Tang Yiwei, Cheng Yun, Du Shuanglong, Li Jie (School of ... Read More
摘要：在太空高能带电粒子作用下，航天器上存在绝缘介质深层充电的危险。介质内沉积电荷导致局部出现强电场（达到107V/m），有可能造成介质击穿放电。一方面，充电过程与介质电导率密切相关，而电导率受温度影响显著，另一方面，介质中的通电导体发热会影响介质的局部温度，于是有必要综合考虑介质中电场与热场的耦合变化过程。对此，我们建立了考虑电场与热场耦合变化的介质深层充电模型，并采用 COMSOL Multiphysics® 软件，实现了数值求解。结果表明，在一定的空间辐射环境下，考虑热场是十分重要的，热导率会对充电结果产生不可忽视的影响 ... Read More
为研究不同加热方式下煤岩内部裂隙在热力耦合作用下的变形特征，建立了微波和常规加热两种数值模型，考查了不同温度场分布特征下裂隙周边应力应变场的变化过程。研究结果表明：微波加热，温度场分布具有内高外低的特征，此时裂隙周边分布的应力多为压应力，且数值较大，裂隙边界位移表现为向内收缩；常规加热，温度场分布具有外高内低的特性，此时裂隙周边分布应力多为拉应力，但量值较低，裂隙边界位移表现为向外扩张；热源越靠近裂隙压应力越明显，反之拉应力明显。 Read More
Janus 颗粒是由物理或化学性质不同的两部分所构成的颗粒的总称。由于其结构的特殊性以及自驱动特性使其在MEMS、药物传输等领域有着潜在的应用价值。本文基于COMSOL Mutiphysics® 4.3a 多物理场耦合模拟平台对不同形状的 Pt-SiO2 型 Janus 颗粒的在不同浓度 H2O2 溶液中的自扩散泳动进行了数值模拟，并进一步研究模拟了球形 Janus 颗粒的近壁面运动。 Read More
为了不断地增加磁存储密度，机械硬盘中磁头和盘片之间的间隙，即飞高，已经减小到了 10nm 以下，以比特磁记录技术（BPM）和热辅助磁记录技术（HAMR）为代表的新兴技术不断涌现，给磁头磁盘界面的超薄气体润滑特性研究提出了新的挑战。 COMSOL Multiphysics® 的使用：由于在超薄气体润滑领域，连续介质模型已经不再适用，控制方程为玻尔兹曼方程。本文以 F-K 模型为控制方程，此模型是在线性玻尔兹曼方程和 BGK 方程基础上结合流量连续条件建立的修正雷诺方程。我们使用了 COMSOL Multiphysics® 中的 PDE 接口进行了自定义修正雷诺方程的建模 ... Read More
