Technical Papers and Presentations

Quick Search

Resources

White Papers

At the COMSOL Conference 2026, engineers, researchers, and scientists from around the globe showcased their use of modeling and simulation across all major industries and in academia. Use the Quick Search tool to find a specific presentation or filter by topic or event location.

Search Term:

2016 - All

Coupled Computational Fluid Dynamics (CFD) and Artificial Neural Networks (ANNs) for Prediction of Thermal-hydraulic Performance of Plate-fin-tube Heat Exchangers

W. Yaici [1], E. Entchev [1]
[1] Renewable Energy, Heat and Power Laboratory, CanmetENERGY Research Centre, Natural Resources Canada, Ottawa, ON, Canada

Plate fin-tube heat exchangers are used extensively in heating, ventilating, and air conditioning, process engineering, and refrigeration systems. They have a high degree of surface compactness. Substantial heat transfer enhancement is obtained as a result of the periodic starting and ... Read More

Analysis of Deformation of a Liquid Packaging Made With Board of the LPB Type

K. B. Matos [1], I. Neitzel [1],
[1] FATEB, Telêmaco Borba, PR, Brazil

The liquid food product packaging are today predominantly made with board LPB type board (Liquid Packaging Board) composite formed by board, which offers mechanical strength, polyethylene, constituent responsible for protection against the passage humidity, and aluminum foil, which helps ... Read More

3D Simulation of the Electric Field of Polymeric Insulators under Adverse Conditions

D. F. Reis [1], E. J. da Silva [1], I. J. S. Lopes [1],
[1] Universidade Federal de Minas Gerais, Belo Horizonte, MG, Brazil

Recent studies report problems related to premature aging and degradation of high-voltage polymeric insulators. Corona activity, which is induced in areas of high electric field levels, is considered one of the leading causes of these problems. The insulator operation under adverse ... Read More

Numerical Study of Secondary Flows in a Sinusoidal Pipe

O. Ayala [1], I. Ahumada [2], L. Renaudin [2],
[1] Engineering Technology Department, Old Dominion University, Norfolk, VA, USA
[2] Brazil Scientific Mobility Program, CAPES, Brasilia DF, Brazil

The direction of the fluid is strongly related to the Reynolds number; as it increases, so does the centrifugal acceleration which tends to push the axial flow towards the outer side of the pipe. Secondary flow appear as 2 or 4 vortical structures after the inflection point. For low ... Read More

Simulation of Electrodynamic Planar Loudspeaker (EDPL) with COMSOL Multiphysics® Software

M. Asgarisabet [1,2], R. Czapla [2], J. Krueger [2], B. Sterling [2],
[1] Michigan Technological University, Houghton, MI, USA
[2] HARMAN International, Detroit, MI, USA

A simulation of an electrodynamic planar loudspeaker (EDPL) has been developed in this study with the COMSOL Multiphysics® software. Using the simulated model, effect of different parts has been studied to improve the performance. The locations of the coil and magnets have been obtained ... Read More

COMSOL Multiphysics® Software: Simplifying Workflow and Promoting Innovations in Nuclear Engineering at ORNL

P. K. Jain [1], J. D. Freels [1],
[1] Oak Ridge National Laboratory, Oak Ridge, TN, USA

At Oak Ridge National Laboratory (ORNL), COMSOL Multiphysics® software has become a preferred software for certain multiphysics applications in nuclear engineering. This presentation will highlight some of the ongoing activities in the following areas: (1) Highly enriched uranium (HEU) ... Read More

Magnetically-Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment

A. Ferreira [1], J. Ochoa [2], R. Siskey [2],
[1] Drexel University, Philadelphia, PA, USA
[2] Exponent Failure Analysis Associates, Philadelphia, PA, USA

Introduction: Medical devices undergo a series of evaluations in order to determine their performance and level of safety in a magnetic resonance (MR) environment. The standard of focus for this work is ASTM F2052-15 which measures the induced displacement of a device due to the ... Read More

A Virtual Product Development Environment for Electronic Hydraulic Power Steering Pump via Multiphysics Modeling

F. Qi [1], J. Men [1], L. Yang [1], Z. Bing [1] , J. Yang [1], F. He [2], L. Pan [2], Z. Shao [2], G. Gao [2], X. Zhang [3], H. Wei [3], S. Duo [3], L. Song [3], X. Wang [3], Z. Wang [3], G. Wei [3], Y. Li [3], H. Yang [3], Z. Ma [3], B. Li [3], Y. Zhang [3], Y. Li [3], Y. Xie [3], D. Yu [3]
[1] FZB Technology, Inc., Plymouth, MI, USA
[2] Shenzhen South Dare Auto Parts, Ltd., Shenzhen, China
[3] Fuxin Dare Auto Parts, Ltd., Fuxin, China

Using advanced computational fluid dynamics software PumpLinx and the COMSOL Multiphysics® software, a virtual product development environment was established for the electro-hydraulic power steering pump system in a passenger vehicle. The model built with the COMSOL Multiphysics® ... Read More

First

171–178 of 426

Last

Technical Papers and Presentations

Quick Search

COMSOL Conference 2026 Proceedings

Collection of Papers, Posters, and Slideshows Accepted by the Program Committee